Delivery Time:Start from 30 days
Certification:Type test report , KEMA STRI SGS test report

Composite High Tension Insulators , 24kv Hydrophobic Overhead Line Insulators

Specifications:

Dimensions and Characteristics of 24kV (22kV) composite high tension insulators

Figure. No	Model	Rated Voltage	Specified Mechanical Load	Coupling Size	Section Length	Insulating length	Minimum Creepage	Full-Wave Impulse Withstand Voltage (Peak)	1 Min Wet Power Frequency Withstand Voltage	Weight	Altitude applicable
		kV	kN		H mm	h mm	L mm	≥ kV	≥ kV	kg	m
3.5	FXBW-24/100-A	24	100	16	704±15	500	1500	256	106	3.2	1000-2000
3.5	FXBW-24/100-B	24	100	16	764±15	560	1700	288	120	3.3	2000-3000
3.5	FXBW-24/100-C	24	100	16	844±15	640	1900	329	136	3.5	3000-4000

Description:

1, 24kV composite high tension insulators are widely used in overhead transmission lines and substations.

2, Dead end fittings are up to the requirements from the clients, usually we use ball, socket, tongue, clevis for suspension insulators with forged steel. The dimensions and coupling size can be exactly according to the specification requirements from the utilities.

3, The silicon rubber color of the insulators are also up to the requirements from the clients and all the silicon rubber materials past 5000 hours aging test silicon content test and hydrophobicity test.

4, ECR core rods are used in all the insulators, so we can guarantee a very good mechanical strength and anti-acid pollution performance for the insulators.

5, All our insulators were type tested and design tested in accordance with IEC61109, maximum RIV is 100µV when tested at 1MHz and10% over nominal line ground voltage for indicated system voltage.

6, All these 24kV composite high tension insulators are designed without corona rings

Applications:

1, 24kV overhead transmission power lines .

2, 24kV substations.

Competitive Advantage:

1, Very good anti-pollution performance, no need to wash the insulators after the installation in lines.

2, Very convenient installation because of its light weight and one whole piece compared with glass insulators and ceramic insulators.

3, Excellent hydrophobicity characteristics can help to void flashover and guarantee the insulators with very good electric performance.

4, Our composite insulators designs offer lighter weight, less breakage, improved seismic performance, high hydrophobicity and withstanding contaminated condition and more flexibility in design than ceramic insulators.These features often translate into lower installation cost, greater durability and more aesthetically pleasing line design.