Delivery Time:30 days
Certification:ISO 9001

15 x 30mm Nylon Driver Plastic Injection Molded Parts Fire Resistant Class UL94V-1​

Key features

Quick fixing with stability

Not easy to be broken

High tensile strength

Easy operation

Plastic nylon driver injection molding parts are used to drive gears or other drive systems for smooth work , a pin hole at the end of driver body and a hexagonal section is placed on round section base and a square section under it for clasping , the driver will be secured well by socket that same design with driver body so that plastic nylon driver injection molding parts are not loosen or slipped out .

Material

Driver injection molding part is made from plastic nylon PA66 .

Specification

Length	15
Upper diameter	10
Lower diameter	8

All sizes are millimeter

Tolerances

Basic Sizes	Tolerance level
	MT5
	A
0-3	0.2
3-6	0.24
6-10	0.28
10-14	0.32
14-18	0.38
18-24	0.44
24-30	0.5

Physical Performance

Density ( g/cm3)	1.14
Water absorption %	3
Shrinkage %	1～2

Mechanical Property

Tensile strength MPa	60～80
Elongation at break %	2.2
Bending strength MPa	100～120
Modulus of elasticity for bending MPa	2000 ～3000
Notched Impact Strength(J/m)	60～100
HR hardness	118

Thermal Performance

Normal working temperature ℃	80～120
Brittle temperature ℃	-30℃
Melting temperature ℃	252
Pyrogenic decomposition temperature ℃	350℃
Matin heatproof ℃	50～60

Electric Performance

Dielectric constant	1.63
Arc resistance sec	130～140
Specific volume resistance Ω·cm	1.83×1015
dissipation factor	100～400
Dielectric strength(kV/mm)	20～30

Features

Good self-lubricant

Reduce friction and improve wear resistance

Resistant high temperature

Normally , the part can be operated smoothly at temperature 150℃ and thermal deformed temperature is up to 250℃ when parts with glass fiber .

Perfect elongation

Elongation at break is 2.2% according to ISO 527 testing method .

Corrosion resistance

Good insulation

Specific volume resistance is 1.83×1015 and resistance to high breakdown voltage support part to be good insulated .

Resistant impact

60 – 80 KJ/M2 normally .

Resistant fire

Generally , the fire resistance is UL94V-2 and UL64V-0 for special parts .

Resistance to low temperature

Parts can be workable at -30℃

Environment friendly

Plastic nylon driver injection molding parts meet RoHS or REACH environmental production standard .

Customized Service

Plastic injection molding parts with standard and non-standard are available for us , and we are good at developing new projects with complicated designs .

★ Professional design team

★ Skillful works

★ Quick delivery

★ Individual Service