Delivery Time:30 days
Certification:ISO 9001

MT 5 Plastic Injection Molding Products 2 Socket POM Fixing Clamp UL94V-2 20 X 10mm

General Brief

Plastic injection molding fixing clamp has two sockets in base that is used to support secure places for another part , two rectangle clamp on both sides to fix part further .

Material

Plastic injection molding fixing clamp part is made from POM with white color .

Specification

Length	25
Width	8
Height	12
Thickness	4
Chamfer	0.5 x 45°

Tolerances

General tolerances is 0.1mm and refer to ISO 2768 – m for unspecified dimensions .

Basic Sizes	Level
	MT6
	A
0-3	0.13
3-6	0.16
6-10	0.19
10-14	0.23
14-18	0.26
18-24	0.3
24-30	0.35
30-40	0.4
40-50	0.47
50-65	0.55
65-80	0.64

ISO 2768- m tolerances

All are in millimeters

Tolerances values based on “ ± “ .

Mechanical Property

Tensile strength MPa	62
Elongation at break %	60
Bending strength MPa	98
Modulus of elasticity for tension MPa	2830
modulus of elasticity for bending MPa	2600
Compressive strength MPa	110
Shearing strength MPa	54
Notched Impact Strength(J/m)	65
HR hardness	80
Friction	0.15
Fatigue MPa	31

Electrical Performance

Specific volume resistance Ω·cm	10
Specific inductive capacity(10Hz)	2.7
Dielectric loss tangent (10Hz)	0.007
Dielectric strength(kV/mm)	20
Arc-resistances	240

Thermal Performance

Heat distortion Temperature(1.82MPa)℃	124
Normal working temperature ℃	100
Working temperature arrange ℃	-40℃～100℃
Coefficient of linear expansion (×10K)	8.5
Heat conduction W/(m·K)	0.23

Typical Features

High mechanical strength

Tensile strength can be up 50.5MPa . close to metal properties . and only a tiny change on mechanical strength even working temperature has a large change .

Good wear resistant

Wear resistant strength still keeps 35MPa or so even item is put 10 J variable load . it is best compared to items that with PA,ABS,HPVC,PS,PC

Resistant impact

POM has good impact resistance but inferior to ABS and PC , Impact performance will be down 90% or so if there is breaking on or in product .

Self-lubricant

POM parts with F4 , C ,MoS2 ,PE and lubricant elements that improve self-lubricant performance .

Stability in dimensions

POM part with good tensile strength and hardness that not easy to be deformed and broken .

Resistant Organic solvent

POM parts are resistant for hydrocarbon ,alcohol ,ether ,aldehyde , gasoline ,lubricant and Weak Alkalis .

Good insulation

POM items nearly not be effected by temperature and humidity on insulation . insulation is related with the thickness of items , eg when thickness is 0.127mm insulation is 82.7kV/mm,thickness is 1.88mmi insulation is 23.6kV/mm

Please contact us for more information for plastic injection molding fixing clamp , and we will give you professional suggestions and help you to design .