Delivery Time:30 days
Certification:ISO 9001

25mm x 150mm Plastic Injection Moulding Parts Holder Panel for Antenna Device

Rectangle plastic injection molding holder panel with customized design for antenna device applied , injection molding holder panel has different shape through holes that are riveted into another part with suitable sockets for getting a good fixing purpose , and several holes placed both ends and middle sections for further fixing by screws .
 
As application requests are critical for injection molding holder panel , it is made from polyamide ( PA ) with property class 66 , this material with perfect comprehensive properties .
 
Wear resistance
 
Good self-lubricant
 
High mechanical property
 
Resistant high temperature
Normally , the part can be operated smoothly at temperature 150℃ and thermal deformed temperature is up to 250℃ when parts with glass fiber .
 
Perfect elongation
Elongation at break is 2.2% according to ISO 527 testing method .
 
Corrosion resistance
 
Good insulation
Specific volume resistance is 1.83×1015 and resistance to high breakdown voltage support part to be good insulated .
 
Resistant impact
60 – 80 KJ/M2 normally .
 
Resistant fire
Generally , the fire resistance is UL94V-2 and UL64V-0 for special parts .
 
Resistance to low temperature
Parts can be workable at -30℃
 
Environment friendly
Parts meet RoHS or REACH environmental production standard .
 
 
Specification for plastic injection molding holder panel
 
Length : 150 mm
Width : 20 mm
Thickness : 3 mm
 
More dimensions for holder panel please contact us , customized sizes
 
 
Precision for plastic injection molding holder panel
 
We refer to ISO 2768-m with level MT7
 

Basic Sizes	Level
	MT7
	A	B
0-3	0.38	0.58
3-6	0.46	0.66
6-10	0.56	0.76
10-14	0.66	0.86
14-18	0.76	0.96
18-24	0.86	1.06
24-30	0.98	1.18
30-40	1.12	1.32
40-50	1.32	1.52
50-65	1.54	1.74
65-80	1.8	2
80-100	2.1	2.3
100-120	2.4	2.6
120-140	2.7	2.9
140-160	3	3.2

Unit : mm
 
 
Thermal Performance for plastic injection molding holder panel
 

Specific volume resistance Ω·cm	1.83×1015
Matin heatproof ℃	50～60

 
 
Mechanical Property for plastic injection molding holder panel
 

Tensile strength MPa	60～80
Elongation at break %	2.2
Bending strength MPa	100～120
Modulus of elasticity for bending MPa	2000 ～3000
Notched Impact Strength(J/m)	60～100
HR hardness	118

 
 
Physical Performance for plastic injection molding holder panel
 

Density ( g/cm3)	1.14
Water absorption %	3
Shrinkage %	1～2
Normal working temperature ℃	80～120
Brittle temperature ℃	-30℃
Melting temperature ℃	252
Pyrogenic decomposition temperature ℃	350℃

 
 
Tips for plastic injection molding holder panel
 
As PA material with water absorption , please don’t put injection molding holder panel parts under water for a long time to avoid changes on dimensions for parts .
 
Don’t keep plastic injection molding holder panel parts outside to prevent from fading .