Delivery Time:3 ~ 20 working days ( Depend Qty )
Certification:CE / SGS / ISO9001

Stylish Optical Speed Gate Turnstile Bi - Directional CE Certification

PRODUCT DESCRIPTIONS:

The fastlane turnstile combines slim line styling with one of the industries widest passages. It has clear, bi-directional swinging motorized barrier panels and a stylish, architectural design that enhances any access control installation. Its sleek design and smaller footprint makes it compatible with any upscale business or institutional environment.

The fastlane turnstile controls pedestrian access between public and secure areas. The fastlane turnstile system is provided with a standard electric interface and can easily integrates the common 3rd party equipment with read/write facilities, such as access control system, time & attendance system, consumption system, ESD system and fare collection system, biometric systems (fingerprint & face recognition), bar-code scanner, Token/ID/IC card reader, coin collector and card collector, etc.

APPLICATIONS:

Typical areas of application are: Employee and Visitor Access Control, Time & Attendance Integration, Loss Prevention, Government Facilities, Buildings, Banks, Museums and Airports, etc high-end places.

SPECIFICATIONS:

Framework	304# Stainless Steel (default), 201# or 316# Stainless Steel or paint (optional)
Thickness of ply	1.7mm
Finish	brushed surface, polishing surface
Shell's size (L*W*H)	1600mm*160mm*1000mm (default)
Swing arm material	Tempered glass or Acrylic (optional)
Stretching out swing length	260mm~600mm
The inductive card reader dimension	equipped with the standard mounting brackets or tailor.
Machine center	Germany technological motor
Power voltage	AC220V±10%, 50Hz±10%
Driver motor	DC36 servo motor
Main-board voltage	12V DC
In-built Infrared	6 pairs/passageway
Passing speed in normally open mode	50 persons/min
Passing speed in normally closed mode	40 persons/min
Passage Width	600mm ~1200mm
Swing arm transmission angle	180°
Swinging direction	unidirectional or bi-directional
Opening / closing time	0.1 seconds
The time required to running state after power on	3 seconds
Automatic reset time after the failure	1 seconds
Mean time to failure	min. 5 000 000
Operation temperature	-10℃ ~ +70℃
Relative humidity	less than 95% not condensed
Working Environment	Indoor/Outdoor (with rain-tent cover)
Input port	relay dry contact signal; +12V level signal, pulse width >100ms, DC12V pulse signal
Communications port	RS232/ RS485 electric standard, communications range ≤1200m. Available to connect with external CAN BUS and Ethernet

STANDARD FEATURES & FUNCTIONS:

-> The fastlane turnstile system can easily integrates with the 3rd party equipment, such as Biometric systems, consumption systems, ESD system and access control system, etc.

-> Operation model: Both directions can be set as controlled mode or free mode, two or one direction can be controlled by switch-button or access controller.

-> Automatic check fault and alarm prompt function: to convenient for users to maintain.

-> The running status of device can be set up through pressing the built-in small keyboard of the main control board.

-> The device is locked until a valid open signal is received.

-> Infrared detection sensors: The device uses several infrared sensors transmitter and receiver type. The sensors are positioned at two different heights to defend against people trying to roll/crawl through the lane without being detected. The sensors are positioned at approximately knee height and waist height. The sensors can detect abnormal access and turnstile system will stay locked.

-> Anti-pinch function: Auto-alarm will activate for unauthorized pedestrian movement and tailgating. The barrier uses several photo sensors to prevent turnstile closure on a person while inside the lane.

-> Reset automatically function: ① the gates can locked automatically when it be forcibly pushed 10 degrees. ② “Go” signal will be cancelled if passage through is not comple