Delivery Time:3 ~ 20 working days ( Depend Qty )
Certification:CE / SGS / ISO9001

Fast Lane Turnstile Barrier Gate Flap Barrier With Anti - Reversing Passing

PRODUCT CLASSIFICATIONS:

-> Single-core mechanism: RNCF H6088

The flap barrier only equipped with single-core in the cabinet as shown in Fig.1, usually be used in single lane or multi-lane applications.

->Dual-core mechanism: RNCF H6088S

The flap barrier equipped with independent dual-core in the cabinet as shown in Fig.2, usually be used in multi-lane applications.

SPECIFICATIONS:

Model	RNCF H6088	RNCF H6088S
Classifications	Single-core mechanism	Dual-core mechanism
Framework	304# Stainless Steel (default), 201# or 316# Stainless Steel or Paint (optional)
Thickness of ply	1.7mm
Finish	brushed surface, polishing surface or anti-fingerprint surface (optional);
Size (L*W*H)	1595mm*280mm*1030mm
Material of flap	different color Acrylic flap available
Stretching-out flap length	230~235mm
The inductive card reader dimension	equipped with the standard mounting brackets or tailor.
Machine center	Germany technological motor
Power voltage	AC220V±10%, 50Hz±10%
Driver motor	DC Stepper motor
Main-board voltage	12V DC
In-built Infrared	7 pairs/lane
Passing speed	30 persons/min
Passage Width	550mm
Opening / closing time	0.6 seconds
The time required to running state after power on	3 seconds
Automatic reset time after the failure	10 seconds
Mean time to failure	min. 5 000 000
Operation temperature	-10℃ ~ +70℃
Relative humidity	less than 95% not condensed
Working Environment	Indoor/Outdoor (with rain-tent cover)
Input port	relay dry contact signal; +12V level signal and pulse width >100ms, DC12V pulse signal
Communications port	RS232/ RS485 electric standard, communications range≤1200m. Available to connect with external CAN BUS and Ethernet
Warranty	12 months

STANDARD FEATURES & FUNCTIONS:

(1). The turnstile system can easily integrates with the 3rd party equipment, such as Biometric reader, consumption system, ESD system and access control system etc.

(2). Operation model: Both directions can be set as controlled mode or free mode, two or one direction can be controlled by switch- button or access controller.

(3). Automatic check fault and alarm prompt function: to convenient for users to maintain and use.

(4). The running status of device can be set up through pressing the built-in small keyboard of the main control board.

(5). The device is locked until a valid open signal is received.

(6). Infrared detection sensors: The device uses several infrared sensors transmitter and receiver type. The sensors are positioned at two different heights to defend against people trying to roll/crawl through the lane without being detected. The sensors are positioned at approximately knee height and waist height. The sensors can detect abnormal access and turnstile system will stay locked.