Access Control System, buy 125Khz / 13.56Mhz Access Control System Standalone Pin Card EM/IC RFID Reader on China Suppliers Mobile

Product Details

Delivery Time:3~5 working days
Certification:CE/ISO

125Khz / 13.56Mhz Access Control System Standalone Pin Card EM/IC RFID Reader

Main products are the access control RFID reader, offline or TCP/IP network Access Controller, related access control products. Along with the RFID Cards, special mini cards, Smart label, RFID Tags, NFC tag, Also we have special trading business on the Animal Identification, like the Glass tag(microchip), ear tag, comply with ISO11784/11785.

Benefits of the reader:

When the card approach the reader, the red light turn into green, after glinting to turn redcolor again, the buzzer sound shows transiting data. It has 500ms proximity time distance for card proximity. After finishing card proximity, if the same ID card is still in the proximity range, reader will not send out the data, neither giving any sound hint. But for Different ID card entering Proximity Area, Reader can do response continually and send out the data.

Notice of the reader:

Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply. When external Power is used, make sure sharing the power with Controller Box or using the same GND. When the distance between card reader and controller is more than 50m, please use Power Line with at least 1.5 square cm Dia, or using several parallel Network wires.

Product Parameter of card reader

	Item	RNCF-CR1
	Size	86x86x20mm
	Color	Black
	Metarials	ABS+Epoxy
	Voltage	DC9~12V
	Current	50mA
	Temperature	-25℃~85℃
	Reader speed	0.2sec
	Humidity	10%~90%
	Punch interval	0.5sec
	Waterproof	IP67
	Support	125KHz EM ID
		13.56MHz MF IC
	Frequency	125KHz/13.56MHz
Communication	Weigand26,Weigand34,RS232,RS485
Communication Distance	The weigand 100m
Built-in	Antenna,speaker,buzzer,red(bule)green color LED
Transmission	Weigand,RS232,RS485
Speical Provide	Logo printing,long cable,Reader module,Daul frequency(ID&IC)
Application	For access control ,attendance,fees,patrol,card,building onsay, parking systems, highways and rfid application.
Advantage	This series of reader with high sensitivity receiver,small operation current,single DC power supply,low price,and high reliability.
Introduction	Using + type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.
Wire Connection	Red DC 5V-16V
	Black GND
	Blue D1
	White D0
	Brown BEEP
	Green LED
	Yellow Alarm
Notice	1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply
	2. When external Power is used, make sure sharing the power with Controller Box or using the same GND
	3. When the distance between card reader and controller is more than 50m, please use Power Line with at least 1.5 square cm Dia, or using several parallel Network wires