Delivery Time:20 - 28 days
Certification:CE / ISO / FDA

New Light Weight 100 % Fiberglass Synthetic Casting Tape Bandage Roll
 
Product Description :

Orthopedic casting tape is composed by manifold layers of special made fiberglass , which was soaked by polyurethane . Polyurethane material is one kind of block copolymer which contains soft segment and it is characterize by better viscosity , fast drying time , high rigidness and light weight .  Dure to better biocompatibility , polyurethane is widely used in medical fields .  Animal study and acute and chronic toxicity test have proved that medical polyurethane is non-toxic and no teratogenecity ,  no local irritation and no anaphylactic reaction .

[Material ]

The tape is made of multi-layer knitted fiberglass impregnated with water-activated polyurethane resin .

Character & advantage

1)  Simple operation : Room temperature operation , short time , good molding feature

2)  High hardness & light weight

     20 times hard than plaster bandage ; light material and use less than plaster bandage ;

     Its weight is plasters 1/5 and its width is plasters 1/3,which could reduce wound burden

3)  Lacunary (many holes structure) for excellent ventilation

     Unique knitted net structure make sure good air ventilation and prevent skin damp and hot & pruritus .

4)  Rapid ossification (concretion)

     It ossifies in 3-5 minutes after open the package and could bear weight after 20 minutes , but plaster bandage need 24 hours for full concretion

5)  Excellent X-ray penetration

     Good x-ray penetration ability makes X-ray photo clearly without remove the bandage , but plaster bandage need remove to make x-ray inspection .

6) Good waterproofing quality

    The moisture - absorbed percent is 85% less than plaster bandage , Even the patient touch the water situation , it still could keep dry in the injury position

7)  Convenient operation & mold easily .

8)  Comfortable & safe to patient / doctor

    Material is friendly to operator and it wont become tension after concretion .

9)  Wide application

10) Environment friendly

     Material are environmental friendly ,  which could not produce polluted gas after inflammation .

Size :

Specification	Package	Color
5.0cm x 360cm	1roll/bag, 10bags/box, 12boxes/ctn	White, Green, Red and Yellow
7.5cm x 360cm	1roll/bag, 10bags/box, 12boxes/ctn	White, Green, Red and Yellow
10.0cm x 360cm	1roll/bag, 10bags/box, 12boxes/ctn	White, Green, Red and Yellow
12.5cm x 360cm	1roll/bag, 10bags/box, 12boxes/ctn	White, Green, Red and Yellow
15.0cm x 360cm	1roll/bag, 10bags/box, 12boxes/ctn	White, Green, Red and Yellow

How to use Casting Tape

1)  Put the pad (cotton coil or cotton slipcover) on the surgery position .

2)  Wear surgical gloves .

3)  Select proper specification according to the surgery position .

4)  Immerse the roll in room temperature water (21°C - 24°C) for 4 - 6 seconds and squeeze it 2 - 3 times firmly .  If the water warmer than 21°C - 24°C shortens the immersing time , while cooler than 21-24°C water lengthens the time .

5)  Enwind spirally ; Overlapping the previous layer by one-half or two-thirds of the roll width . To maintain proper tension is very important and take care to avoid excessive tightness . The strength can be determined by the number of layers used . Just 3-4 layers provide a string non-weigh-bearing cast and 5 - 6  layers are typically adequate for weight-bearing cast .

6)  Additional after the initial enwinding should be overlapped on itself to achieve good molding . Enwind the roll in 3-5 minutes after immersing in water because after that time it will be concretion .

7)  Smooth and rub the surface to achieve good contact between layers . Keeping smoothness helps mold the wrap .

Allow about 10 minutes for sufficient concretion and let patients not move during this time . It could bear electric weight after 20 minutes .

8)  It could be windowed , trimmed or removed with traditional cast saw equipment .

Precaution Please apply the surgical rubber gloves when you operate the product.When the resin is stuck to operator , please wipe it out with cotton swab with acetone .

Storage :

Be careful not to break the package .

Store  Cast  tape at room temperature .

Damaged products by careless handing cannot be replaced . Please handle and store them carefully 

The shelf life of   Cast tape