Carbon DioxideAdsorbent Introduction

My companysupply of carbon dioxide (CO2) adsorbent, on the basis of LiOH raw materials,through special process adhesive, molding, drying and processing.The adsorbentwith abundant internal porosity, can be fully contact and react with air andfilter the CO2 gas in the air, the adsorption efficiency of more than60%.Reacts with CO2 from the air, generate lithium carbonate and water, andgives off heat. Per kg of CO2 adsorption, heat released about 1400 kj.

Features: freshadsorbent are pink, reaction after failure of adsorbent is pure white.Factorywith vacuum packing; Notice at ordinary times kept sealed to prevent adsorbentis exposed to air, slow failure.

Carbon DioxideAdsorbent Parameters

Specific gravity：0.89x10³kg/m³

 AbsorbCO2Heat release：700KJ/kg

Adsorptionefficient ：68.3%

Rate of dust：1.8%

Color change:fresh material color is pink, after the failure into a pure white.

Appearancecharacteristics: loose porous structure, large surface area of absorption,permeability is good.

Carbon DioxideAdsorbent Application Method

Because of LiOHdust may irritate the nasal mucosa, lithium hydroxide generate strongstimulation, so when use suggest adding filter layer at the bottom of thepotion (namely, let the wind blowing agent layer again blowing filter), preventdust float in the sky.

LiOH lithiumhydroxide dust in the humid environment is not easy to dust, and trace of dustwill not cause harm to human body, so need not worry too much.