Rocsil FoamFoaming Composition

Rocsil FoamFoaming is made up of resin and catalyst for mine injection products, used inan airtight air and gas, filling the gap hole and reinforce the coal and rockstrata.Rocsil foam only need a double fluid grouting pump and a system of theinjection gun, made the power, the mine air pressure requirement wind pressureis 0.4 to 0.7 Mpa, and high pressure pump output liquid pressure is seven timesthe supply pressure of the wind.Two components of resin and catalyst with 4:1mixture, the ratio of volume of two components is automatically activated bythe compressed air in the gun, rapid hair should generate foam, foam volumerapid expansion to the original volume of 25 to 30 times, directly injectedinto the processing area, after inflation, Luo Kexiu bubble hardening in a fewminutes.

Rocsil FoamFoaming Advantage

①Sensitivity.

②High inflation rate

③Good ability to workunder pressure.

④Can be directly put outthe fire.

⑤Construction technologyis simple.

⑥Wide-range in application.