Safety Tester, buy Hi-Pot Tester / Insulation Tester on China Suppliers Mobile

Product Details

Hi-Pot Tester / Insulation Tester

Product Description

Features:
Compact size and light weight
Four test modes available, W, I, W-I, I-W
Linkable to Ground Bond Tester
Capable of storing 5sets of testing conditions
Electronic ramp up and dwell time for up to 999.9 seconds
Front panel lockout
Built-in PLC Remote interface
Front panel software calibration
Easy to operate

Ordering information:
7110 AC Withstand Voltage Tester
7112 AC Withstand Voltage / Insulation Resistance Tester
7120 AC/DC Withstand Voltage Tester
7122 AC/DC Withstand Voltage / Insulation Resistance Tester

Specification:

Model	LCX-7122	LCX-7120	LCX-7112	LCX-7110
AC WITHSTAND VOLTAGE
Output Rating		5KVAC/12mA
		Range	Resolution	Accuracy
Output Voltage, KVAC	0-5.00	0.01	± (2% of setting + 5V)
Output Frequency	50Hz/60Hz ± 100ppm, User Selection
Output Waveform	Sine Wave, THD. < 2% (Resistive Load), Crest Factor = 1.3 - 1.5
Output Regulation	± (1% of output + 5V), From no load to full load
SETTINGS
Hi-Limit AC Current, mA	0.10 - 12.00	0.01	± (2% of setting + 2counts)
Lo-Limit AC Current, mA	0.00 - 12.00	0.01	± (2% of setting + 2counts)
Ramp Time, second	0.1 - 999.9	0.1	± (0.1% + 0.05sec)
Dwell Time, second	0, 0.2 - 999.9 ( 0=continuous)	0.1
Arc Detection	0, 1 - 9 ranges (0=OFF, 9 is the most sensitivity)
DC WITHSTAND VOLTAGE (7120, 7122 ONLY)
Output Rating		6KVDC/5mA
Output Voltage, KVDC	0 - 6.00	0.01	± (2% of setting + 5V)
Output Ripple	< 5%(6KV/5mA at Resistive Load)
SETTINGS
Hi-LimitDCCurrent, mA	0.02 - 5.00	0.01	± (2% of setting + 2counts)
Lo-LimitDCCurrent, mA	0.00 - 5.00	0.01	± (2% of setting + 2counts)
Ramp Time, second	0.1 - 999.9	0.1	± (0.1% + 0.05sec)
Dwell Time, second	0, 0.2 - 999.9 (0=continuous)	0.1
Arc Detection	0, 1 - 9 ranges (0=OFF, 9 is the most sensitivity)
Discharge Time	< 200 msec
INSULATION RESISTANCE (7112, 7122 ONLY)
Output Rating	1KVDC/1000MΩ
Output Voltage, KVDC	0.10 - 1.00	0.01	± (2% of setting + 2V)
SETTINGS
Hi-Limit Resistance, MΩ	0, 1 - 1000 (0=OFF)	1	± (3% of setting+2counts)at > 500VDC ± (7% of setting +2counts)at < 500VDC
Lo-Limit Resistance, MΩ	1 - 1000	1
Delay Time, second	0, 0.5 - 999.9 (0=continuous)	0.1	± (0.1% + 0.05sec)
MEASUREMENT
AC/DC Voltage, KV	0 - 6.00	0.01	± (2% of reading + 1count)
DC Voltage, KV (IR only)	0.10 - 1.00	0.01	± (2% of reading + 2V)
AC Current, mA	0.10 - 12.00	0.01	± (2% of reading + 2counts)
DC Current, mA	0.02 - 5.00	0.01	± (2% of reading + 2counts)
Resistance, , MΩ	1 - 1000 (Auto Range)	0.001 0.01 0.1	± (3% of reading+2counts)at > 500VDC ± (7% of reading +2counts)at < 500VDC
GENERAL
Input Voltage AC	110/220Vac± 15%, 50/60Hz ± 5%, Fuse 3A Fast
PLC Remote Control	Input: Test, Reset
Output: Pass, Fail, Processing
Memory	5 Sets Store/Recall of each Memory, 4 Test Mode Selectable (W, I, W∼ I, I∼ W Only 7112, 7122)
Display	16× 2 LCD with back light
Key Lock	To prevent unauthorized alteration of the test Parameters
Calibration	Build-in software and external calibrated meters
Environment	0-40º C, 20-80%RH
Dimension/Net Weight	280mm(W)× 89mm(H)× 370mm(D)/ 9Kg
STANDARD ACCESSORIES
Power Cord(10A)	× 1
Fuses	× 3 (Including a spare contained in the fuse holder)
High Voltage Test Cable(1101)	× 1
Return Test Cable(1102)	× 1