IEC60884,VDE0620,IEC60598,IEC60065Fig11 plug and socket torque test machine

1.plug and socket torque test machine;
2.IEC60884,VDE0620,IEC60598,IEC60065Fig11,BS1363.3
3.touque testing

IEC standard plug and socket torque test machine

1.Standard compliant:

Plug Torque Tester/equipment conforms to : IEC60884,VDE0620,IEC60598,IEC60065Fig11 and BS1363.3 .

2.Appliance:

(1)Plug Torque Tester/Device is for compliance is checked by engaging the device, as during intended use, with the socket-outlet of a test apparatus.

(2)Plug Torque Tester is a device provided with pins intended to be introduced into fixed socket-outlets shall not impose undue strain on these socket-outlets.

(3)The balancing arm of the test apparatus pivots about a horizontal axis through the centre lines of the contact tubes of the socket-outlet at a distance of 8 mm behind the engagement face of the socket-outlet.

(4)With the device not in engagement, the balancing arm is in equilibrium, the engagement face of the socket-outlet being in the vertical position.

(5)After the device has been engaged, the torque to be applied to the socket-outlet to maintain its engagement face in the vertical plane is determined by the position of a weight on the balancing arm.

 3.Techinical parameter:

(1)The torque shall not exceed 0,25 Nm.

(2)Load: 0.5N*2/1.25N*1/0.25N*1.

(3)Plug: UL plug*1, Australia plug*1,all-purpose plug*1.