Specifications

1.Material: UHMWPE,Natural Rubber and Aluminium alloy
2.Avoid the belt damage when touch between bar and belt surface.

Impact bar is used in the loading area of the belt conveyor to replace the traditional cushion rollers. It’s designed to absorb impact loading which will dramatically reduce shock and stress loading to the structure

Features
1. The connection of the arc surface of impact assembly with the conveyor belt enables the conveyor belt to running smoothly and avoids the damage to the belt through the contact between the bar and surface of belt.
2.The conveyor belt is stressed evenly in the loading area, which will reduce the daily maintenance cost. It effectively eliminates the spillage or scattering of the material caused by inequality of the stress on the belt.
3.The UHMW polyethylene surface has outstanding sliding properties, to reduce the frictional resistance to the minimum.
4. Ultra elastic rubber absorbs the impact in the maximum.
5. Each part of the impact bar is closely jointed by hot vulcanization.
6. “T-track” fastening device has different tightening points along the bar and make the joining strong and reliable, easy to install and remove.

 

Technical Data

Color of UHMWPE	Blue/White
Tensile strength	(Mpa)	30
Elongation at break	(%)	300
Hardness	(Shore A)	95-98
Density	(g/cm3)	0.93-0.94
Coefficient of friction		0.07
Color of rubber	Black
Tensile strength	(Mpa)	19
Elongation at break	(%)	400

Size and Specification

Length	Width	Height
1220	100	51, 65,76, 100
1400
1524
1600
1800

 

Note

1. Standard fastening accessories including bolt and nylon –inserted hexagon nut are offered.
2. Other types can be made according to customers’ demand.