Specifications

Waste engine oil/ car oil/ mixed oil regeneration machine:
Heating device are optional;
mainly produce diesel oil.

 

JZC Introduction:

 

Series JZC Waste engine oil/ car oil/ mixed oil regeneration machine is special for regenerating the black waste oil, including waste engine oil, lube oil, hydraulic oil, gear oil, dirty diesel oil, mixed oils etc. JZC machine effectively transfer waste oils to diesel oil under Pyrolysis, JZC works under 580C temperature, makes Hydrocarbon molecules break out, and re-order combination, forming diesel oil. During the distillation process, liquid waste oil transforms to oil-gas in distillation tank under high temperature, then oil-gas transform to liquid oil again after the cooling system, the liquid oil treated by the special tanks to desulfurize and decolor. Finally get an eligible diesel fuel with good color. This diesel fuel oil can be as the fuel in truck, tractor, diesel generator, heavylorry, also can be used as the burning fuel oil etc. During the distillation process, JZC effectively remove the wear debris, asphalt, wax quality, impurities, moisture, acid and get rid of carbon particles, deep oxides which disperse in oil. JZC machine is very suitable for the oil refinery company, also for the small oil company who want to make the oil by self.

 

 

 

After the JZC Waste engine oil/ car oil/ mixed oil regeneration machine machine, the final products is the diesel oil, the user can deployment the diesel fuel oil to any model and any specification oils by adding different additives. (We can provide you the relative additive name and way)

 

 

 

Series JZC machine is energy-saving, environment friendly machine, during the process it just generates less waste (sludge), the waste (Sludge) doesn’t contains any oil, there is no pollution for the environment (The waste/sludge also can be processed into a carbon toner for printing the raw materials); during the oil distillation process, the oil-gas and low volatile are discharged after combustion of hydrocarbons and purification treatment, so, there is no odor and no environment pollution.

 

 

 

Series JZC mainly combust fuel (The fuel can be the waste engine oil self), or natural gas, coal to heat the waste engine oil, very less electricity consumption, so it is very low operation cost. During the distillation process, you don’t need add any chemicals andactivator; the all distillation process is under high temperature (80-580°C)

 

Machine Technical Parameters:

Index name	Unit Type	JZC-2	JZC-5	JZC -10	JZC -20
Handling capacity	Ton / day	2	5	10	20
Recovery ratio	%	75-90	75-90	75-90	75-90
Working pressure	Mpa	≤ 0.3	≤ 0.3	≤ 0.3	≤ 0.3
Temperature Range	°C	80-580	80-580	80-580	80-580
Working Noise	dB (A)	65	65	65	70
Power Supply	V	As per user’s option
Fuel consumption	T	0.15	0.3	0.6	0.7-0.9
Heating power	kW	0. 3	0. 37	1.1	1.5
Total power	kW	5.5	7.5	9.2	15.4
In/Out of pipe	mm	15	20	25	32
Equipment area	m2	700	1000	1600	2000
Equipment weight	T	2.2	3	5	8

Specifications of regenerated diesel oil:

Index Name	Unit	Value	Testing Standard
Color value	-	≤ 3.5	GB/T 6540
Kinematic viscosity	(20 °C)mm2/s	3.0-8.0	GB/T 265
Sulfur content	% (m / m)	≤0.2	GB/T 380
Moisture	% (v / v)	Less than trace	GB/T 260
Acidity value	mgKOH/100mL	≤7	GB/T 258
Oxidation stability, total insoluble	mg/100ml	≤2.5	SH/T 0175
Freezing Point	°C	≤ 0	GB/T 510
Flash point (closed)	°C	≥ 55	GB/T 261
Density	(20°C) g/cm3	0.82-0.86	GB/T 1884
Cetane value		35-45	GB/T 11139
Recovery of 50% distillation temperature	°C	≤300	GB/T 6536
Recovery of 90% distillation temperature	°C	≤355	GB/T 6536
Recovery of 95% distillation temperature	°C	≤365	GB/T 6536
NOTE: If index does not meet the requirements, it can be solved by adding additives. Diesel oil main indicator is the value of Cetane and content of sulfide.