IIJ Insulating Oil Tester for Measuring Breakdown Voltage 

IIJ series fully automatic Insulating Oil Testing Instrument is designed as per the requirement of IEC156 Testing Method of Insulation Oil Medium Strength, which via proper programming, has got functions of auto boosting, step down, stirring, display and print out. After breakdown of oil medium, HV break off will operate within 10 seconds to enable an auto isolation of control system partly; this effectively safeguards the personnel security and equipment safety. The tester is suited for testing of the strength of insulating oil medium, as well as for testing of withstands voltage of transformer oil.

Insulating Oil Testing Instrument Features :
1. Fully automatic, control by microcomputer, utilization of new I/O terminal.
2. Numbers of times of testing and idling time of stirring are set via digital setting.
3. Test results displayed and printed out automatically.
4. Strong capability of anti-interference.
5. High accuracy of testing and high capacity of anti-jamming.
6. Easy to operate, small size, light weight which operated in the open air very conveniently and convenient for maintenance
7.Can store 99 groups oil testing data which is convenient to reading and print. The testing data can keep 100 years under the condition of power off.
8.System time can go on running under power off.(the system time just for reference can not be the standard of timing)

Insulating Oil Testing Instrument Technology and parameter data
1. Power supply: AC220V 10%,2.  50 HZ
3. Voltage output: 60 KV, 80KV,100KV
4. Capacity:1.6KVA, 2.0KVA
5. Pressure increase rate : About 2 KVA/S
6. Pressure testing speed: 3%
7. Break down sensitivity : <2KV
8. Wave form distortion :≤3%
9. Time of break down: ≤10ms
10.  Operational environment: Temperature:0°C-40°C, Humidity: the most relative humidity85%
11. Storage environment : Temperature:-20°C-40°C, Humidity: the most relative humidity75%.
12. Operational height: <150m (can be specially designed if the height is over 1500m)
13.Test cell: Glass, volume 300 to 500 ml, with protective cover and stirrer.
14.Electrodes: Stainless steel spherical 36 mm diameter/hemispherical 25 mm radius, 2.5 mm gap as
per IEC-156.
15.Initial stand time of oil sample: 180 seconds
Intermediate stand time of oil sample: 60 seconds
String time of oil sample:  60 seconds
Number of consecutive test: 6
16.Weight for High voltage and control: Total about 55KG

NAKIN Company products list as following:

ZY-high effective vacuum transformer oil purifier, oil filtration

ZYD-Double stages Vacuum insulating/transformer oil purifier, oil treatment, oil purification

ZYM-Mobile/trailer type Vacuum transformer oil treatment, oil filtration machine

TY-Vacuum Turbine oil purifier, oil treatment Plant

TJ-Coalescence and separating light/fuel/gasoline oil filter, oil purifier machine

TYA-Vacuum Lubricating oil purifier/hydraulic oil purification

TYK- Phosphate ester fire-resistant oil purifier, oil filtration machine

JZS-Engine oil regeneration system, waste oil recycling

JZC-Waste Oil Distillation System

JYWL-Horizontal-closed type filtration device

TPF-Waste cooking oil recycling machine

BZ-Transformer oil regeneration device, oil purifier

PF-Plate pressure turbine/transformer/engine/diesel/hydraulic oil filter, oil purifier machine

JL-Portable turbine/lube/insulating oil purifier, oil filtering, oil filter

NKVW-Vacuum pump system

IIJ-II-BDV oil tester, insulating oil dielectric strength tester

NKEE-Oil moisture sensor, water content sensor