co2 laser power supply, buy 2015 new arrival 100W laser power supply F100 with LCD display for troubleshooting on China Suppliers Mobile

Product Details

2015 new arrival 100W laser power supply F100 with LCD display for troubleshooting

OVERVIEW

F100 laser power supply with LCD display for troubleshooting, is specially designed for CO2 laser machine. It supports 100W and below CO2 laser tube. It comes with voltage stablizer and LCD display, which shows the states and prompts the failures. With stable performance and low fault rate, it has received CE and ISO 9001 certificates. We provide reliable products, complete after-sales service, 1 year warranty and lifetime maintenance services.

PICTURES

2015 new arrival 100W laser power supply F100 with LCD display for troubleshooting

PARAMETERS

Model	F80	F100	F150
Input Voltage	AC90V~AC110V
AC Frequency	47-440Hz
Max Input Power	600W	650W	700W
Max Input Current	3A	3.5A	4A
Max Output Voltage	DC 40KV	DC 45KV	DC 55KV
Max Output Current	DC 28mA	DC 32mA	DC 38mA
Efficiency	≥90% (full-load)
MTBF(Mean time between failures)	≥10000 hours
Response Speed	≤1mS(from switching signal to the output current achieve to 90% of Pre-set current)
Voltage-resisting	Input-output, input-machine shell; AC1500V 10mA 60s
Working Environment	Work temperature: (-10-40)℃ Relative humidity: ≤90%
Cooling Type	Forced air cooling
Size LWH(mm)	235144104	278144104	330144104
Shell Color	Silvery

ADVANTAGES

1. With PFC wide range of input voltage (90~250V), F100 can avoid instable light emission caused by instable voltage.

2. The power supply has open-circuit protection, auto-protection starts when high voltage end is open or is not connected properly.

3. Its LCD display shows various kinds of information, such as working status, input, output, waterproof, board signals, and open circuit, easy to maintain.

4. There is a network cable connecting the power supply and LCD display, with which the customers can observe working conditions.

5. With the built-in high voltage discharge function, there is no residual voltage when dissemblying the power supply.

6. LCD screen can show working condition of two sets of power supplies, matching double head laser machine.
7. Integrated main case has better heat dissipation.
8. It is compatible with various kinds of CO2 laser tubes.

POWER SUPPLY TERMINAL DEFINITION

1	2	3	4	5	6
TH	TL	WP	G	IN	5V

TH	Input Signal	The control of laser: TH≥3V, emitting laser; TL≤0.3V, no laser.
TL	Input Signal	The control of laser: TH≥3V, no laser; TL≤0.3V, emitting laser.
WP*1	Input Signal	The control of laser: TH≥3V, no laser; TL≤0.3V, emitting laser.
G	GND	This foot must be connected well with the shell of laser machine and the ground of control board.
IN*2	Input Signal	The control of laser power: Both 0-5V analog signal and PWM signal can control the laser power.
5V	Output Power	Output 5V, the maximum output current is 20mA.

COMPANY INFORMATION

Shenzhen Reliable Electromechanical Technology Company is a professional supplier for high quality laser engraving&cutting machine and parts, located in Shenzhen City, Guangdong Province.