Product Details

Specifications:

Product line solution according to your requirements PLC/TPC/Rexroth Hydraulic valve system/Siemens Motor 7*24 remote service1. It is suitable for the press fitting and stretch forming of metal and plastic products as well as the movements of coining and overprinting.2. It mainly applies to the fields of machine tool, engineering machinery, bearings, washing machine, automobile parts, motor components and powder metallurgy.3. It is suitable for the molding of plastic products, such as DMC and BMC.4. The machine, with a high degree of automatization, is particularly suitable for the mass production of parts. And it can be used as assembly line with several such equipments.

Description:

1. Y27 Series Frame-type Hydraulic Press is a kind of multifunctional precision machine which has high speed.

2. Optimized design, the frame is entirely welded with steel plates, and treated to relive stress by tempering for high precision.

3. Cartridge valve equipped for hydraulic control system, reliable, durable and less hydraulic shock, shorter connection pipeline and fewer release points.

4. Centralized button control system, with adjustment, hand and semi-auto operation modes at operator’s choice (set-stroke single and set pressure single).

5. Four-angle and eight-side guide rail in high precision and with strong capacity against deflection, concentrated lubrication.

6. New type of oil cylinder sealing components marked by high reliability and long service life.

7. Sliding blocks operating in high speed, ensuring high efficiency.

8. The slide operating pressure, no-load quick travel and low-speed movement can be adjusted according to technological requirements.

9. Hydraulic cushion is fitted beneath the worktable; adequate knockout hole and hydraulic cushion are prepared on the plate of worktable with the operating modes including drawing, ejection and no ejection.

10. The working speed of this equipment is 3 to 4 times faster than that of Y41. It employs eight-side guide device and ejecting device, which can automatically eject workpieces with accurate guiding and fast speed.

11. The drawing device can be added to this equipment in order to change moulds easily. But the stretching of large metal parts needs to add hydraulic cushion to this equipment.

Main parameters:

			11801	11802	11802-1	11803	11803-1	11805	11806
ltem		Unit	YAN28-63/100	YAN28-100/150	YAN28-150/200	YAN28-200/300	YAN28-220/315	YAN28-315/400	YAN28-400/600
Nominal Forec		kN	1000	1500	2000	3000	3150	4000	6000
Drawing Force		kN	630	1000	150	2000	2200	3150	4000
Knock out Force		kN	190	190	400	400	400	800	630
Blank-holder Force		kN	300	500	630	800	1000	1000	2000
ure of liquid		MPa	25	25	25	25	25	25	25
Stroke of drawing slide		mm	600	600	700	800	800	800	800
Stroke of Bland-holder slide		mm	250	250	250	400	350	400	720
Stroke of knock out cylider		mm	200	250	250	350	350	-	400
Daylight of drawing slide		mm	1000	1200	1300	1400	1560	1500	2190
Daylight of Blank holder slide		mm	600	750	900	720	820	1000	1300
Table area		mm²	720×580	800×800	1000×900	980×900	1120×1120	1360×1200	1250×1250
Main Ram	Rapid down	mm/s	100	100	100	100	100	100	100
	Slow down	mm/s	20	20	20	20	20	20	16
	Pressing	mm/s	10~20	10~20	10~20	10~20	10~20	10	10~16
	Return	mm/s	100	100	100	135	100	100	100
Drawing Slide	Knock-out	mm/s	95	95	60	60	90	90	100
Drawing Slide	Return	mm/s	220	220	180	180	200	200	200
Overall dimensions of machine	L-R	mm	2500	2300	3800	3800	3800	4500	4300
	F-B	mm	1500	900	1800	1800	1800	2800	2315
	Height above floor	mm	3200	3600	4400	4600	4400	4600	5240
Total power		kW	11	15	22	37	37	37	37
Total weight		kg	6000	8000	10000	13000	15000	17000	41000
Old model			YQ28-63/100	YQ28-100/150	YQ28-150/200	YQ28-200/300	YQ28-220/315	YQ28-315/400	YQ28-400/600