Product Details

Specifications

For plastic, form products, it could put heating facilities on table & bottom surface of ram which is controlled by PID & DRO.

Application of machine

The Press composed of main body and control devices which respectively formed with frame, main cylinder, knock-out cylinder, hydraulic system and drive mechanism, lower and upper limit switches pipe lines, electrical control cabinet and etc.

Drive mechanism includes oil tank, high pressure pumps, Iow pressure control sytem, valves, Electrical control system is designed according to the working procedure of hydraulic principle. By preset, sequential operation can be achieved by drive mechanism via pumps, cylindres, valves, tank and pipe lines.

The press is appliable to compression of plastic materials, For example, powder and plastics products forming and heat/cool metal extrusion, metal sheet drawing,stamping,bending, edge-folding, straightening, depressed mounting and etc.

Independent drive structures and electrical devices insure reliable operation with centered control buttons. Adjustment, manual operation and semi-automatic operation, three modes are provided respectively for your choice.

The working pressure, pressing speed, unload-descending speed and decelerated pressing speed can be respectively adjusted in reqirements.

By preset, knock-out, non-knock-out and drawing can be taken out with pressure-depentdent or distance-dependent movement of die. In the case of pressure-dependent movement, the main cylinder of YAN32 type press initiates pressure-holding, time delay and automatic return.

Main parameters

Model			11587	11588	11589	11590	11591	11592	11593	11594	11595	11596	11597	11598	11599	11560
Description			Y30-6.3	Y30-10	Y30-16	Y30-25	Y30-40	Y30-63	Y30-100	Y30-160	Y30-200	Y30-315	Y30-400	Y30-500	Y30-630	Y30-800
Rated pressure		KN	63	100	160	250	400	630	100	1600	2000	3150	4000	5000	6300	8000
Maximm pressure of liquid		Mpa	8	12.5	20	16	25	25	25	25	25	25	25	25	25	25
Stroke of side		mm	250	250	400	400	400	500	600	700	700	800	800	900	900	900
Daylight		mm	400	400	500	630	630	750	800	900	1000	1100	1250	1300	1500	1500
Throat depth		mm	200	200	250	350	350	320	400	420	450	800	1500	1500	1500	1500
Speed of slide	Descent	mm/s	/	/	/	80	80	120	100	80	80	80	80	80	80	80
	Pressing	mm/s	18-20	20-22	18-20	18-20	18-20	18-20	15-20	10-12	10-15	8-10	8-10	10-15	6-10	5-8
	Return	mm/s	55	50	50	75	75	100	100	70	70	60	55	70	60	45
Size of table	L-R	mm	440	440	500	580	700	710	800	900	900	1500	2000	2500	2500	3000
Size of table	F-B	mm	380	380	450	570	570	600	700	800	900	1500	1800	2000	2000	2400
Table height above floor		mm	700	700	710	710	710	810	800	900	900	400	400	400	400	400
Motor power		mm	3	3	4	5.5	5.5	7.5	7.5	11	15	22	2×22	2×22	2×22	2×22