Name: unbelievable performance L/LD Dense Phase Pneumatic Conveying Pump
Brand: MANDA
Availability: InStock

Product Details

Product Description

ISO certificated Dense Phase Pneumatic fly ash transport for powder

Dense phase pneumatic fly ash transport is a widely known as plug flow systems which is nonsuspension flow.

The product is filled in a pressure vessel, which is then pressurized with the air or gas to be used for conveying.

Once a pre-set pressure is reached inside the vessel, the bottom discharge valve opens and the material is

conveyed to the destination. The material to air ratios is higher in dense phase conveying in the range of 20 to 100 kg/kg of air. Dense phase conveying uses compressed air and requires an air compressor.

Dense phase conveying is used for high capacity and long distance conveying. Dense phase conveying employs

the pressure vessel with valves and instrumentation which is controlled through PLC based control panel.

Today, numerous materials are transferred quickly and efficiently using pneumatic systems and their enclosed design is responsible for protecting the environment, workers, and the material itself from being disturbed during the process.

Characteristic:

Pneumatic systems are relatively economical to install and operate

Pneumatic systems are totally enclosed and if required can operate entirely without moving parts coming into contact with the conveyed material. Being enclosed these are relatively clean, more environmentally acceptable and simple to maintain

It is a flexible system in terms of rerouting and expansion. A pneumatic system can convey a product to any place a pipe line can run.

Parameters

L Series

Type	L-0.8	L-1.2	L-1.4	L-1.6	L-1.8	L-2.0	L-2.2	L-2.4
Pump body diameter(mm)	800	1200	1400	1600	1800	2000	2200	2400
Total volume(m³)	0.35	1.32	2.15	3.0	4.12	5.0	7.5	9.25
Working temperature(°C)					≤120
Designed pressure					0.78 MPa
Working pressure					0.2—0.5MPa(Determined by conveying distance and material property)
Body material					Q235-B
Conveying distance					500~1500 m
Matched pipeline		DN80		DN100⁄DN125		DN125/DN150
Mix proportion	50	60	60	60	60	60	70	70
Conveying capacity(t/h)	5	12	20	25	30	35	45	55
Air consumption(m3/min)	2		6		6-10	10-20	16-20

LD Series

Parameters	LD0.6	LD1.0	LD1.5	LD2.0
Body Inner Diam.(mm)	800	1000	1200	1400
Total volume(M^3)	0.6	1.0	1.5	2.0
Body materail		Q235-B
Operation Temp.(°C)		≤120
Max. design pressure(Mpa)		0.78
Operation Pressure(Mpa)		0.2-0.5 (Depending on the conveying disance)
Max. conveying distance(m)		<1000
Outlet conveying Diam		DN80	DN100
Air consumption (m^3/min)		3.5-7	5-10

P.S. Tell me your required parameter, we can also design it for you!

Kindly inform us the below information  in inquiry, by this ,

             we will give you accurate reply  .

           - What’s the capacity

          -What’s the temperature of medium

          -What’s the conveying distance

          - What’s medium will be conveyed

    Advantages:

Air Conveyor has the lowest Cost of Owner,because of the systems efficiency in transporting product from

point to point. Saving time& Labour.

1. Pneumatic Conveying Systems are relatively economical to install and operate.

2.Pneumatic Conveying Systems are totally enclosed and if required can operate entirely without moving parts

coming into contact with the conveyed material. Being enclosed there are Hygiene & Cleanliness Benefits.

3. A Pneumatic Conveying Systems  can convey a product to any place a pipe line can run. They’re flexible in

terms of rerouting and expansion.

4. Pneumatic Conveying Systems  offer greatly reduced capital cost for long distance conveying.

Packing & Shipping

1. Main part and relative valves, instrument: composite material box packed, rain-proof.

2. Will be marked on per part with the regulations on goods.

3. Steel parts will be loaded into container directly.

Our Service

Quality Assurance:

One year Quality warranty period (after put into operation formally).

During the warranty period, if occurred due to the goods themselves cause malfunction or damage, the Company will guide maintenance or replacement of the corresponding parts without pay, if need to go site, buyer charge the transport fee and accommodation of engineer.

Provide technical guide forever.

After Quality Warranty period, will provide the spare parts with cost price.

Our Company

Shanghai Manda Dynamic CO.,Ltd is established and located in Minhang Disctrict of Shanghai.

Our pneumatic conveying experts can ascertain the correct conveyance for your material in order to design

a custom system that successfully meets your unique material handling requirements. We offer models with top or

bottom discharge to match your application and materials.

We guarantee our design is completely in conformity with customer's previous program plan and the equipment

operates smoothly.