Availability raw material

scrap steel rebar from construction       new steel wire coil

                                                       or tyre bead wire (need annealing treatment in advanced)

Available final steel nail shape :

Our production line originally is designed for common wire nail , but if adding other special auxiliary equipments like Corrugated Nail Machine , Umbrella Head Making Machine , Galvanized Machine , Thread-Rolling Machine and etc , will can be further to make screw nail , cement nail and roofing nail .

 Spare parts provided from Wire Nail Production Equipment Factory: 

punch pin ,nail knife,nail mould,and steel ball(for this one you can buy from your local market )

Specifications from Wire Nail Production Equipment Factory :

 Flowchart of working procedure

1.wire drawing machine

draw out the big rebar into certain diameter which keep same as the nail you plan to make ,meanwhile the rust which attached on the surface also will be removed if you take our scrap steel bar style wire drawing machine or horizontal style drawing machine .

2.nail making machine

pre-set the length of nail you prefer , then use this machine to produce the wire nail .

3.polishing machine

to make the finished nail more bright ,notes that add some saw powder,paraffin,oil and other material in the machine when polishing .

Remark: except what aboved three kinds, other auxiliary equipments are needed also like butt welding machine , point rolling machine , nail knife sharpener , steel wire coil holder and etc

Business Card

Features :

1.20M2 workshop are okay ,and just need 3 people to operate for the whole production line

2. Both of the scrap iron wire and the new steel rod can be used to make nails.The profit using wasts steel is 5 times of that using finished steel

4 All the main components are made of quality steel, such as shaft, cams and gear.

5. This machine adopts closed plunger type transmission

 structure so as to ensure the features such as high speed, low noise and less impact(self-lubricating).

6. can feed the materials automatically. Once start, it could make nails continuously.

7 A friction gear is installed between crankshaft and flywheel. It plays a protective role of safety when the machine breaks down or overloaded.

8.use control handle at the inlet place in order to control incoming line at any time during operating.