Specifications

block heater tester
1)Temperature Range:Room Temperature-200;
2)Need two insert blocks except the 96X0.2ml blocks.
3)MOQ:1pc

A & E Lab Hot Selling are include: UV VIS Spectrophotometer, Visible Spectrophotometer, Flame Photometer, PCR-Cycler, Blocker Heater,Shaker Incubator,Melting Point Device, Hotplate, Stirrer, Stirrer Hotplate, Rotory Mixer, Tube Roller Mixer, 3D Rocker, See-Saw Rocker, Vortex Mixer, Orbital Shaker, Cold Keeper, etc.

Welcome to inquire us!

 

block heater tester

 

Block heater is designed for widely use in Chemical, Biochemical, Clinical and other General Labs 

for heating, digesting, incubating, concentrating and other heating processes.

 

There are two models of bock heaters, ABH-101 and ABH-102. Both are digital control with advanced

PID and giving better uniformity across blocks and much accurate heating.

 

Calibration can be easily set up using 1 to 5 points. After calibration, the display will reflect actual 

sample tubes or block temperature.

 

ABH-101 can heat the block from room temperature to 200ºC, and accommodates three different 

types of insert block; The ABH-102 have the same temperature range, but can be separately 

controlled and run for the two different blocks.

 

Various block inserts can be chosen for different tubes and need to be ordered separately.

When ordered the 96X0.2ml block, the two adapters will added in the order. And 96X0.2ml block 

can only be used in ABH-101.

 

All of the block heaters come with the block removal tool and thermometer ranging from 0 to 200ºC.

We provide 3-full years warranty with best service for these products.

 

Technical Specification:

 

Model	ABH-101	ABH-102
Temperature Range	Room Temperature-200ºC
Temperature Stability	+/-0.1ºC
Temperature Maximum Variety  Between Identical Blocks @ 50ºC	+/-0.2ºC
Power Supply	230V, 50Hz or 110V,60Hz
2Dimension	280x260x110mm
Difference	Need three insert blocks or on  96X0.2ml	Need two insert blocks except the  96X0.2ml blocks.

 

Block Heater-Aluminum Blocks

 

All insert blocks made from anodized aluminum with identical dimension (75WX95LX50H) and can be 

used in any combination except the 96X0.2 blocks.

 

We also provide any customer-made blocks with desired insertion depth and diameter.

 

 

Technical Specification:

 

Model	Tube (Diameter/Type)	No. Of Holes	Hole Size (dis. X depth)mm
ADB-01	27mm	6	26.75X47
ADB-02	0.5ml tubes	30	7.8 (9º taper)
ADB-03	96 well plate	---	6.3 (9º taper)
ADB-04	2ml tubes	20	10.5X33
ADB-05	13mm	20	13.5X47
ADB-06	1.5ml tubes	20	10.7X14 (9º taper)
ADB-07	12mm	20	12.6X47
ADB-08	12mm	20	12.6X33
ADB-09	16mm	12	16.5X47
ADB-10	10mm	20	10.5X47