Hot Selling 3 Aluminum Blocks with Block Heaters
USD $300 - $600 /Piece
Min.Order:1 Piece
A & E Lab Instruments (Guangzhou) Co., Ltd.
A & E Lab.
Main Products: Atomic Absorption Spectrometer (AAS), Fluorescence Spectrophotometer,
Bio-Spectrophotometer, UV Vis Spectrophotometer, Visible Spectrophotometer, Flame Photometer, Whiteness Meter, Turbidity Meter, Colorimeter, Gloss Meter, Tintometer, Automatic Polarimeter, Auto Melting Point Apparatus, Automatic Refractometer, Abbe Refractometer, PH/DDS/TDS Meter, Incubator, shaker, Hotplate, Mixer, PCR, Oven, etc.
Block Heaters (Dry Blocks)
Applications:
Block heater is designed for widely use in Chemical, Biochemical, Clinical and other General Labs for heating, digesting, incubating, concentrating and other heating processes.
There are two models of bock heaters, ABH-101 and ABH-102. Both are digital control with advanced PID and giving better uniformity across blocks and much accurate heating.
Calibration can be easily set up using 1 to 5 points. After calibration, the display will reflect actual sample tubes or block temperature.
ABH-101 can heat the block from room temperature to 200ºC, and accommodates three different types of insert block; The ABH-102 have the same temperature range, but can be separately controlled and run for the two different blocks.
Various block inserts can be chosen for different tubes and need to be ordered separately.
When ordered the 96X0.2ml block, the two adapters will added in the order. And 96X0.2ml block can only be used in ABH-101.
All of the block heaters come with the block removal tool and thermometer ranging from 0 to 200ºC.
We provide 3-full years warranty with best service for these products.
Technical Specification:
Model | ABH-101 | ABH-102 |
Temperature Range | Room Temperature-200ºC | |
Temperature Stability | +/-0.1ºC | |
Temperature Maximum Variety Between Identical Blocks @ 50ºC | +/-0.2ºC | |
Power Supply | 230V, 50Hz or 110V,60Hz | |
2Dimension | 280x260x110mm | |
Difference | Need three insert blocks or on 96X0.2ml | Need two insert blocks except the 96X0.2ml blocks. |