NJbinglab PFA Acid purification system for PerkinElmer ICP-MS, small footprint
USD $6570 - $6570 /Piece
Min.Order:1 Piece
Nanjing Binzhenghong Instruments Co., Ltd
NJbinglab PFA distillation filtration reflux apparatus, support customization
NJbinglab PTFE multi-stage filter, easy to disassemble and clean
NJbinglab PFA rinse tanks,one piece molding, for cleaning of wafer
NJbinglab PFA headspace bottle, 50ml, with gasket, low metal element content
High throughput microwave digestion system vessels, for CEM, 55ml, 40 bit
NJbinglab PFA tips for mettlertoledo pipettes ,burr-free, smooth and easy to clean
PFA purification system:
1. Product introduction:
Acid purifier: also known as acid purification system, high-purity acid purifier, acid reagent purifier, high-purity acid distillation purifier, etc. In laboratory work, the purity of the acid is often poor, causing deviations and errors in the analysis results. Commercially available pure acids are often expensive and difficult to meet the large demand for acids in daily analyses. Therefore, purifying and optimizing the quality of acid is an economically feasible way. Our acid purifier can be used in laboratories to purify HNO3, HCl, HF, alkali solutions and organic solvents. After purification, the purity of the acid is further improved. Later in the experiment, our unit's Teflon series reagent bottles can be used to collect high-purity acid.
2. Working principle:
The acid purifier uses the principle of thermal radiation to keep the liquid temperature below the boiling point to evaporate, and then condenses the acid vapor to prepare high-purity water and high-purity reagents. It is widely used in sample processing and analysis experiments.
3. Product features:
1. It can meet the low detection limit requirements of ICP and ICP-MS and provide laboratory-grade ultrapure acid for demanding analysis applications. All containers used are made of Teflon corrosion-resistant non-adsorption plastic and can handle laboratories such as HNO3, HCl, HF, etc. Commonly used acids.
2. Experiments have proven that after a single distillation of an acid with a metal impurity content of about 10 ppb, the metal impurity content can be reduced to about 0.01 ppb. If the acid requirements are higher, the purification times can be increased.
web:
Phone/Whatsapp/ Wechat :+8615805176994
Mail: rossnjbzh@gmail.com / rossg@njbinglab.com