stainless steel 71905 Angular Contact Ball Bearings
USD $1.5 - $1.5 /Set
Min.Order:10 Sets
Jinan Kelunte Bearing Co., Ltd.
stainless steel 71905 Angular Contact Ball Bearings
Designation: 71905 | ||||||||||||||||
Type: Angular contact ball bearings. Single row, single thrust (contact angle <45). Complete. (25X42X9). | ||||||||||||||||
Main dimensions: | ||||||||||||||||
|
SINGLE ROW ANGULAR CONTACT
Single row angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one direction. CLUNT can preload the bearings at the factory so that the correct load will develop once the bearing is put into service. The bearings in this series are assembled with a specific internal clearance, so that they will have a specified contact angle under load. The standard contact angle used by CLUNT is 30° but, in many cases, a 40° contact angle can also be specified. We also offer special high-speed bearings with phenolic resin cages with a 15° contact angle.
Double row angular contact ball bearings have an inner and outer ring with a double raceway. The two rows are so related that the contact angle is similar to a pair of back-to-back single row bearings. CLUNT’s 5200 and 5300 series offer continuous races and can carry thrust loads in either direction. The 3200 and 3300 series have filling slots, so it is necessary to mount them with the thrust load acting against the un-notched face of the rings.
stainless steel 71905 Angular Contact Ball Bearings Catalogue
Boundary dimensions(mm) | Basic load ratings(kN) | Limiting speeds(rpm) | Mass(Kg) | Bearing Number | ||||||
d | D | B | rs min | r1s min | Cr | Cor | Grease | Oil | (Approx.) | |
10 | 35 | 11 | 0.6 | 0.3 | 9.50 | 4.60 | 22,000 | 29,000 | 0.041 | 7300B |
12 | 37 | 12 | 1 | 0.6 | 10.5 | 4.95 | 19,000 | 26,000 | 0.045 | 7301B |
15 | 42 | 13 | 1 | 0.6 | 12.5 | 6.65 | 17,000 | 22,000 | 0.057 | 7302B |
17 | 47 | 14 | 1 | 0.6 | 14.8 | 8.00 | 15,000 | 20,000 | 0.109 | 7303B |
20 | 52 | 15 | 1.1 | 0.6 | 17.3 | 9.65 | 13,000 | 18,000 | 0.141 | 7304B |
25 | 62 | 17 | 1.1 | 0.6 | 24.4 | 14.6 | 11,000 | 15,000 | 0.234 | 7305B |
30 | 72 | 19 | 1.1 | 0.6 | 31.0 | 20.5 | 9,600 | 13,000 | 0.352 | 7306B |
35 | 80 | 21 | 1.5 | 1 | 36.5 | 24.2 | 8,400 | 11,000 | 0.469 | 7307B |
40 | 90 | 23 | 1.5 | 1 | 45.0 | 30.5 | 7,400 | 9,900 | 0.636 | 7308B |
45 | 100 | 25 | 1.5 | 1 | 58.5 | 40.0 | 6,600 | 8,900 | 0.854 | 7309B |
50 | 110 | 27 | 2 | 1 | 68.0 | 48.0 | 6,000 | 8,100 | 1.11 | 7310B |
55 | 120 | 29 | 2 | 1 | 79.0 | 56.5 | 5,500 | 7,300 | 1.42 | 7311B |
60 | 130 | 31 | 2.1 | 1.1 | 90.0 | 66.0 | 5,100 | 6,800 | 1.77 | 7312B |
65 | 140 | 33 | 2.1 | 1.1 | 102 | 75.0 | 4,700 | 6,300 | 2.15 | 7313B |
1.deep groove ball bearing
6200 SERIES BALL BEARINGS | LIGHT | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
NPB Part No. RFQ per item | Bore | Outside Diameter | Width | Max. Fillet Radius | Balls | Static Load Lbs. | Dynamic Load Lbs. | ||||||
Frac. | Inch | Tol. | Frac. | Inch | Tol. | Tol. | +.0000 -.0050 | No. | Diam. | ||||
Open | Seal/Shield | ||||||||||||
6200 | 10 | .3937 | -.0003 | 30 | 1.1811 | -.0004 | 9 | .3543 | .025 | 8 | 3/16 | 500 | 885 |
6201 | 12 | .4724 | -.0003 | 32 | 1.2598 | -.0005 | 10 | .3937 | .025 | 7 | 7/32 | 595 | 1055 |
6202 | 15 | .5906 | -.0003 | 35 | 1.3780 | -.0005 | 11 | .4331 | .025 | 8 | 7/32 | 675 | 1180 |
6203 | 17 | .6693 | -.0003 | 40 | 1.5748 | -.0005 | 12 | .4724 | .025 | 8 | 1/4 | 890 | 1500 |
6204 | 20 | .7874 | -.0004 | 47 | 1.8504 | -.0005 | 14 | .5512 | .040 | 8 | 5/16 | 1390 | 2220 |
6205 | 25 | .9843 | -.0004 | 52 | 2.0472 | -.0005 | 15 | .5906 | .040 | 9 | 5/16 | 1565 | 2415 |
6206 | 30 | 1.1811 | -.0004 | 62 | 2.4409 | -.0005 | 16 | .6299 | .040 | 9 | 3/8 | 2255 | 3360 |
6207 | 35 | 1.3780 | -.0005 | 72 | 2.8346 | -.0005 | 17 | .6693 | .040 | 9 | 7/16 | 3070 | 4430 |
6208 | 40 | 1.5748 | -.0005 | 80 | 3.1496 | -.0005 | 18 | .7087 | .040 | 9 | 15/32 | 3520 | 5035 |
6209 | 45 | 1.7717 | -.0005 | 85 | 3.3465 | -.0005 | 19 | .7480 | .040 | 9 | 1/2 | 4005 | 5655 |
6210 | 50 | 1.9685 | -.0005 | 90 | 3.5433 | -.0006 | 20 | .7874 | .040 | 10 | 1/2 | 4450 | 6065 |
6211 | 55 | 2.1654 | -.0006 | 100 | 3.9370 | -.0006 | 21 | .8268 | .060 | 10 | 9/16 | 5630 | 7500 |
6212 | 60 | 2.3622 | -.0006 | 110 | 4.3307 | -.0006 | 22 | .8661 | .060 | 10 | 5/8 | 6955 | 9065 |
6213 | 65 | 2.5591 | -.0006 | 120 | 4.7244 | -.0006 | 23 | .9055 | .060 | 10 | 21/32 | 7665 | 9900 |
6214 | 70 | 2.7559 | -.0006 | 125 | 4.9213 | -.0008 | 24 | .9449 | .060 | 10 | 11/16 | 8415 | 10715 |
2.taper roller bearing catalog:
BASIC BEARING NUMBER | BORE | O.D. | WIDTH | WEIGHT | ||
d | D | T | B | C | ||
mm | mm | mm | mm | mm | kg | |
inch | inch | inch | inch | inch | lb | |
32004 | 20 | 42 | 15 | 15 | 12 | 0.097 |
0.7874 | 1.6535 | 0.5906 | 0.5906 | 0.4724 | 0.213 | |
32005 | 25 | 47 | 15 | 15 | 11.5 | 0.114 |
0.9843 | 1.8504 | 0.5906 | 0.5906 | 0.4528 | 0.251 | |
32006 | 30 | 55 | 17 | 17 | 13 | 0.166 |
1.1811 | 2.1654 | 0.6693 | 0.6693 | 0.5118 | 0.365 | |
32007 | 35 | 62 | 18 | 18 | 14 | 0.224 |
1.3780 | 2.4409 | 0.7087 | 0.7087 | 0.5512 | 0.493 | |
32008 | 40 | 68 | 19 | 19 | 14.5 | 0.273 |
1.5748 | 2.6772 | 0.7480 | 0.7480 | 0.5709 | 0.601 | |
32009 | 45 | 75 | 20 | 20 | 15.5 | 0.346 |
1.7717 | 2.9528 | 0.7874 | 0.7874 | 0.6102 | 0.761 | |
3.spherical roller bearing catalog:
Bearing No. | Boundary dimensions | Basic load ratings(kN) | Limiting speeds | Mass | |||||
mm | Dynamic | Static | rpm | Kg | |||||
d | D | B | rs min | Cr | Cor | Grease | Oil |
| |
23022 | 110 | 170 | 45 | 2 | 282 | 455 | 1,800 | 2,800 | 3.71 |
23022K | 110 | 170 | 45 | 2 | 282 | 455 | 1,800 | 2,800 | 3.58 |
23022KW33C3 | 110 | 170 | 45 | 2 | 282 | 455 | 1,800 | 2,800 | 3.58 |
23022W33C3 | 110 | 170 | 45 | 2 | 282 | 455 | 1,800 | 2,800 | 3.71 |
23024 | 120 | 180 | 46 | 2 | 296 | 495 | 1,700 | 2,600 | 4.05 |
23024K | 120 | 180 | 46 | 2 | 296 | 495 | 1,700 | 2,600 | 3.9 |
23024KW33C3 | 120 | 180 | 46 | 2 | 296 | 495 | 1,700 | 2,600 | 3.9 |
23024W33C3 | 120 | 180 | 46 | 2 | 296 | 495 | 1,700 | 2,600 | 4.05 |
23026 | 130 | 200 | 52 | 2 | 375 | 620 | 1,500 | 2,300 | 5.9 |
23026K | 130 | 200 | 52 | 2 | 375 | 620 | 1,500 | 2,300 | 5.69 |
23026KW33C3 | 130 | 200 | 52 | 2 | 375 | 620 | 1,500 | 2,300 | 5.69 |
23026W33C3 | 130 | 200 | 52 | 2 | 375 | 620 | 1,500 | 2,300 | 5.9 |
1. Neutral Package: Plastic Tube + Carton + Pallet
2. Commercial Package: single CLUNT Box + Carton + Pallet
1. Payment:
1) TT, 30% deposit , 70% before shippment.
2) L/C at sight. (high bank charge, not suggest , but acceptable )
3) 100% Western Union in advance. (specially for air shipment or small amount)
2. Delivery:
1) Less than 45 KGS, we will send by express. ( Door to Door, Convenient )
2) Between 45 - 200 KGS, we will send by air transport. ( Fastest and safest, but expensive )
3) More than 200 KGS, we will send by sea. ( Cheapest, but long time )
Jinan Kelunte Bearing Co., Ltd. is a professional bearing manufacturer and is engaged in the imported bearings.
Our company is engaged in the imported bearings,company's main imported Roller Bearing,Ball Bearing,deep groove ball bearings,taper roller bearings,angular contact ball bearings,Pillow Block Bearing,Ceramic Bearing,cylindrical roller bearing, spherical roller bearing .
1.Why I choose you?
Profession and reliability. Everyone likes to blow big bubbles. But we need to be honest with ourselves. We maybe not the most handsome, but we have a heart like fire. To meet the morning sunshine, to enjoy our work every day. Say what we mean and mean what we said is our words to ourselves. We work for our family.
2.How long are their lifetime?
My friend, with your gentle care,6 months to 36 months for different products.
3.How to deal with the quality problem?
Congratulation! You must be winning lottery!
You will get helps by beautiful ladies from our QC terms. There will be discount, secret gifts, of course the new bearings waiting for you.On the other hand, we have a PPAP of each shipment, so that we knowWhich shipment is bad? We will cut off production line and avoid more loss.
4.Can you take responsibility for me?
Of course, I’m happy to help you! But I just take responsibility for my products. We are not willing to see the quality issues, but if happen this problem we will deal with them according to the actual situation.
if have any problems,pls contact with me: