71938 Bearing for Car Gearbox
USD $38.82 - $38.82 /Piece
Min.Order:10 Pieces
Jinan Kelunte Bearing Co., Ltd.
71938 Bearing for Car Gearbox
Descriptions of 71938 bearings
An angular contact ball bearing uses axially asymmetric races. An axial load passes in a straight line through the bearing, whereas a radial load takes an oblique path that tends to want to separate the races axially. So the angle of contact on the inner race is the same as that on the outer race. Angular contact bearings better support "combined loads" (loading in both the radial and axial directions) and the contact angle of the bearing should be matched to the relative proportions of each. The larger the contact angle (typically in the range 10 to 45 degrees), the higher the axial load supported, but the lower the radial load. In high speed applications, such as turbines, jet engines, and dentistry equipment, the centrifugal forces generated by the balls changes the contact angle at the inner and outer race.
71938 bearings, angular contact ball bearing, is made of Chrome Steel. which have a contact angle so that they can sustain significant axial loads in one direction together with radial loads.
71938 bearings have raceways in the inner and outer rings that are displaced with respect to each other in the direction of the bearing axis. This means that they are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.The axial load carrying capacity of angular contact ball bearings increases with increasing contact angle. The contact angle α is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the load is transmitted from one raceway to another, and a line perpendicular to the bearing axis.
Quick details of 71938 bearings
Bearing Name | 71938 C |
New Model | 71938C |
Old Model | 1036938 bearing |
product Model | 71938C |
Category | Angular Contact Ball Bearings |
Brand | CLUNT Bearing |
Inner Diameter d ( mm ) | 190 |
Outer Diameter D ( mm ) | 260 |
Thickness B ( mm ) | 33 |
Applications of 71938 bearings
Angular contact ball bearing: oil pump, arjen robben, air compressor, air blower watts of all kinds of transmission, fuel injection pump, printing machine.
Advantages of 71938 bearings
1.Low friction, almost noiseless and high rolling speed
2.Easy to install
3.Simple structure ensures fast equipment
4.Optimised internal design
5.High load ratings
6.Increased limiting speed
7.High strength ball guided brass cage
8.High dimensional and running accuracy
9.Narrow axial clearances or preloads range
10.Universal facing in standard
The features of 71938 bearings
71938 bearings is that it can bear both radial load axial load, the axial load capacity depends on how big the contact angle is, the bigger angle, the bigger capacity.
71938 Bearings is mainly applied on high speed, high precision and little axial load occasions, such as airplane engine main shaft, machine tool main shaft and main shafts of other high speed precision machine. It can also be applied on high frequency motor, steam turbine, oil pump, air compressor and printing machine etc. It is one of the bearings most widely used in machinery industry.
Model Number
Principal dimensions | Basic load ratings | Mass | Designations | |||
dynamic | static | |||||
d | D | B | C | C0 | ||
mm | kN | kg | - | |||
180 | 250 | 33 | 168 | 212 | 4,2 | 71936 CD/P4A |
180 | 280 | 46 | 229 | 275 | 8,9 | 7036 ACD/P4A |
180 | 280 | 46 | 242 | 290 | 8,9 | 7036 CD/P4A |
190 | 260 | 33 | 163 | 208 | 4,35 | 71938 ACD/P4A |
190 | 260 | 33 | 172 | 220 | 4,35 | 71938 CD/P4A |
190 | 290 | 46 | 234 | 290 | 9,35 | 7038 ACD/P4A |
190 | 290 | 46 | 247 | 300 | 9,35 | 7038 CD/P4A |
200 | 280 | 38 | 199 | 250 | 6,1 | 71940 ACD/P4A |
200 | 280 | 38 | 208 | 265 | 6,1 | 71940 CD/P4A |
200 | 310 | 51 | 281 | 365 | 12 | 7040 ACD/P4A |
200 | 310 | 51 | 296 | 390 | 12 | 7040 CD/P4A |
220 | 300 | 38 | 208 | 285 | 6,6 | 71944 ACD/P4A |
220 | 300 | 38 | 221 | 300 | 6,6 | 71944 CD/P4A |
220 | 340 | 56 | 338 | 455 | 16 | 7044 ACD/P4A |
220 | 340 | 56 | 338 | 455 | 16 | 7044 CD/P4A |
240 | 320 | 38 | 212 | 300 | 8,5 | 71948 ACD/P4A |
240 | 320 | 38 | 225 | 310 | 8,5 | 71948 CD/P4A |
My company equipment is advanced, leading the management level, the warehouse clean and orderly, mount guard after qualified staff skill training, greatly improve the quality of our products and reduce the production cost, follow up competitiveness in the bearing industry.Our company pays attention to technology innovation the technological innovation enables enterprises to form core competitiveness, and to keep a competitive strength.
1: Germany equipment,
2: dust-free workshop,
3: smokeless workshop,
4:5 s management system,
5: ERP warehouse outbound,
Welcome to visit our factory, and promote the communication and learning, and go further in the bearing industry .
Our company quality first gained international certification
International certification:
1: ISO9001:2000,
2: BV,
3: CC,
Inland certification:
1: Shandong star enterprise ,
2: Domestic well-known brand,
3: Five years gold supplier in Alibaba,
4: The key enterprises of "Jinan 11th Five-Year Plan"
Packaging
A: barreled package+outer carton+pallets
B: single box+outer carton+pallets
C: tube package+middle box+outer carton+pallets
D: According to your requirement