CNC Spindle Bearing Angular Contact Ball Bearing 718/1180C/P5 Bearing
USD $15.45 - $15.45 /Piece
Min.Order:100 Pieces
Jinan Kelunte Bearing Co., Ltd.
Coating Machine Used Angular Contact Ball Bearing 72900C/HV Bearing
Front Wheel Car Bearing Angular Contact Ball Bearing 705CJ Bearing 705
Used Cars for Sale in Germany Angular Contact Ball Bearing 705C Bearing 705
Japan Brand IKO bearing distributors IKO bearing price list Cam follower needle roller bearing
suitable for Load handing machinery NACHI industry bearings 6313 series & deep groove ball bearing
CNC Spindle Bearing Angular Contact Ball Bearing 718/1180C/P5 Bearing
An angular contact ball bearing uses axially asymmetric races. An axial load passes in a straight line through the bearing, whereas a radial load takes an oblique path that tends to want to separate the races axially. So the angle of contact on the inner race is the same as that on the outer race. Angular contact bearings better support "combined loads" (loading in both the radial and axial directions) and the contact angle of the bearing should be matched to the relative proportions of each. The larger the contact angle (typically in the range 10 to 45 degrees), the higher the axial load supported, but the lower the radial load. In high speed applications, such as turbines, jet engines, and dentistry equipment, the centrifugal forces generated by the balls changes the contact angle at the inner and outer race.
bearing 718/1180C/P5 , angular contact ball bearing, is made of Chrome Steel. which have a contact angle so that they can sustain significant axial loads in one direction together with radial loads.
bearing 718/1180C/P5 have raceways in the inner and outer rings that are displaced with respect to each other in the direction of the bearing axis. This means that they are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.The axial load carrying capacity of angular contact ball bearings increases with increasing contact angle. The contact angle α is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the load is transmitted from one raceway to another, and a line perpendicular to the bearing axis.
71801X1C | 1036801J | 12×22×5 | 0.006 |
71801X1C/YA | 1036801JK | 12×22.5×5 | 0.006 |
718/13C/P2 | B103608/13KJ | 13×24×6 | 0.0095 |
718/1180C/P5 | 10368/1180 | 1180×1420×106 | 332 |
72800CF4/HN | 2036800KNW3 | 10×19×6 | 0.37 |
719/6C | 1036096J | 6×15×15 | 0.004 |
719/7C | 1036097 | 7×17×5 | 0.0042 |
719/7X1C/P4 | C1036097J | 7×15×5 | 0.0043 |
719/8C | 1036098J | 8×19×6 | 0.007 |
719/9C | 1036099J | 9×20×6 | 0.13 |
71924CA | 1036924J | 120×165×22 | 1.51 |
72900C/HV | 2036900XJ | 10×22×8 | 0.018 |
73904CL1 | 3036904L | 20×37×13 | 0.041 |
705CJ | 36015 | 5×14×5 | 0.0036 |
705C | 36015J | 5×14×5 | 0.0036 |
705CTA | 36015JK | 5×14×5 | 0.0036 |
707CJ | 36017 | 7×19×6 | 0.006 |
707C | 36017J | 7×19×6 | 0.006 |
708CJ | 36018 | 8×22×7 | 0.0105 |
708C | 36018J | 8×22×7 | 0.0104 |
709CJ | 36019 | 9×24×7 | 0.0132 |
709C | 36019J | 9×24×7 | 0.016 |
7000C | 36100 | 10×26×8 | 0.0182 |
7000C | 36100J | 10×26×8 | 0.0204 |
7000CTA | 36100JK | 10×26×8 | 0.0182 |
Advantages of 718/1180C/P5 bearing
1.Low friction, almost noiseless and high rolling speed
2.Easy to install
3.Simple structure ensures fast equipment
4.Optimised internal design
5.High load ratings
6.Increased limiting speed
7.High strength ball guided brass cage
8.High dimensional and running accuracy
9.Narrow axial clearances or preloads range
10.Universal facing in standard
The features of 718/1180C/P5 bearing
718/1180C/P5 bearing is that it can bear both radial load axial load, the axial load capacity depends on how big the contact angle is, the bigger angle, the bigger capacity.
718/1180C/P5 bearing is mainly applied on high speed, high precision and little axial load occasions, such as airplane engine main shaft, machine tool main shaft and main shafts of other high speed precision machine. It can also be applied on high frequency motor, steam turbine, oil pump, air compressor and printing machine etc. It is one of the bearings most widely used in machinery industry.
Q: Why do we choose your company?
A: Our company has been a professional bearing manfacture for 1o year. We always insist quality first. We have our bearing factory, therefore we have advantage in quality control and price.
Q:What is the delivery time?
A: Most of the bearing we have stock. For small quantity, we will arrange delivery within 3 days.
Q: What is your payment term?
A: Our payment term include T/T, Western Union, Paypal etc.
Q: Can you send bearing samples first?
A: Yes, we can send bearing samples to check quality first
Q: What is your MOQ?
A: For common bearing model number, our MOQ is 1pc.
CNC Spindle Bearing Angular Contact Ball Bearing 718/1180C/P5 Bearing