China Vertical Chain Type bucket elevator for mining

Specifications

1.Bucket elevator for mining with Rectangular SINGLE CHANNEL closed case.
2. Flanged structure and bolt connection.
3. Large lifting capacity.
4. ISO,TUV, SEW,FLENDER.

Operating principle of bucket elevator for mining

When the driving device of bucket elevator start working , it drives the head wheel to make the chain with steel buckets to do the circular movement from the below of the tail to the top of the head. The head section has outlet and the tail section has inlet.
The elevator bucket is filled with material and run to the head section, then the material is thrown out from the outlet under the action of centrifugal force according to the parabolic design.With the running, the empty bucket is back to the below tail section and be filled material from the inlet again,then be lifted up to do parabolic discharge movement . So this cycle finish the vertical transport of materials.

Application scope

Bucket elevator for mining is widely used in metallurgy, cement, chemical, light industry,power plant and so on. It is used for lifting slay ,piece coal, crushed stone, mineral stone, egg stone, dry and bulk and fluidity power, granular and block material and so on. The material density is not more than 2 t/m3, the site temperature is not more than 2500C.

Main Features

Machine Parts

Name:  Steel bucket

Brand: YIJI

Original: China

 Bucket is made of wear resistant steel and welded with steel plate or stamping forming, Welded or stamping in the bucket is with a thickness of 2 to 6 mm steel plate made. In order to reduce the bucket lip wear, often in the hopper edge outer lip welding a additional sidecar.

Main Features

Name: Bush Roller chain
Brand: YIJI
Original: China
Roller chain is made of alloy steel, and have high wear resistance.The chain must be with heat treatment, to improve its hardness. Chain is the most critical drive part of the bucket elevator.

Machine Parts

Name: Head section
Brand: YIJI

Original: China

The head section comprises head wheel, bearing assembly, discharge port, observation door, blocking alarm and so on.

After the material is raised, discharge at the discharge port at the head.

Main Features

Name: Middle section
Brand: YIJI

Original: China
The middle casing is finished by the plasma cutting machine, shape rules, high precision. Bucket elevator has a good sealing performance with the rectangular closed casing, no leakage in the conveying process.The segments are connected by bolts, using the sealing gasket and sealant to seal.

Name: Tail section
Brand: YIJI
Original: China

The tail section comprises tail wheel, bearing assembly, inlet port, observation door, speed sensor and so on.
The material is added at the tail inlet,then to be promoted.
Speed sensor is installed on the shaft of tail and used to detect the speed of equipment whether it is normal, and convey the signal  to the electronic control system.