Specifications

wood crusher machine
1.Attractive appearance,high output
2.low nosiy ,operating easily
3.saving energy,low cost
4.CE

CE certificated wood bark crusher/wood briquette crusher Introduction

• Wood crusher is ideal equipment for producing various types of wood products. Wood pellets or biomass briquettes production line also needs crushing equipment.
• Wood crusher is specially designed to crush branches, tree roots,slab scraps and so on for further production.It occupies little room which makes it quite a popularity in small size biomass fuel plants.

 

CE certificated wood bark crusher/wood briquette crusher Technical Data

 

Model	Capacity	Weight	Inlet Size	Dimension	Power
AZS—MFS600	0.6—0.8t/h	550 kg	200x200 mm	1.4x0.8x0.8 m	11—15kw
AZS—MFS700	0.8—1.0t/h	800 kg	200x260 mm	1.6x0.8x1.0 m	15—22kw
AZS—MFS800	1.2—1.7t/h	1200 kg	250x300 mm	1.6x1.2x1.3 m	15—22kw
AZS—MFS900	2.5—3.2t/h	2300 kg	300x400 mm	2.6x1.6x1.6 m	15—22kw
AZS—MFS1000	3.5—4.5t/h	2800 kg	340x450 mm	2.8x1.8x1.8 m	45--55kw
AZS—MFS1200	4.5—5.5t/h	3300 kg	380x500 mm	2.8x1.8x1.8 m	55--75kw

 

 

 

 

 

 

 

 

 

 

 

CE certificated wood bark crusher/wood briquette crusher Features

1. Reasonable design, improves crushing efficiency by 50% compared to traditional type.
2. Attractive appearance, high output of 400-2000kg/h.
3. One motor drives crushing, energy saving and low cost.
4. Crushed materials are fit to process pellets or briquettes.

The Matirals of CE certificated wood bark crusher/wood briquette crusher                            

• Wood crusher can crush tree branches and stems with the diameter of 70mm-250mm.
• Many fiber stalk like bamboo, couch grass, corn and Sorghum stalks are also common wood pellets materials.
• The crushed materials are particles and with diameter of about 3-5mm and can be directly for pelletizing or briquetting.

 

Warm Tips for CE certificated wood bark crusher/wood briquette crusher          

1. The bearings should be injected oil after the machine working for three to four hours.
2. Adjust the tightness of v belt after using for a period, lower 6—10mm is suitable.
3. Clean and examine carefully of every part of the machine, if there is any malfunction, repair in time.