Specifications

wood crusher machine
1.Attractive appearance,high output
2.low nosiy ,operating easily
3.saving energy,low cost
4.CE

Zhengzhou professional wood roller crusher for waste wood Introduction

• Wood crusher is ideal equipment for producing various types of wood products. Wood pellets or biomass briquettes production line also needs crushing equipment.
• Wood crusher is specially designed to crush branches, tree roots,slab scraps and so on for further production.It occupies little room which makes it quite a popularity in small size biomass fuel plants.

 

Zhengzhou professional wood roller crusher for waste wood Technical Data

 

Model	Capacity	Weight	Inlet Size	Dimension	Power
AZS—MFS600	0.6—0.8t/h	550 kg	200x200 mm	1.4x0.8x0.8 m	11—15kw
AZS—MFS700	0.8—1.0t/h	800 kg	200x260 mm	1.6x0.8x1.0 m	15—22kw
AZS—MFS800	1.2—1.7t/h	1200 kg	250x300 mm	1.6x1.2x1.3 m	15—22kw
AZS—MFS900	2.5—3.2t/h	2300 kg	300x400 mm	2.6x1.6x1.6 m	15—22kw
AZS—MFS1000	3.5—4.5t/h	2800 kg	340x450 mm	2.8x1.8x1.8 m	45--55kw
AZS—MFS1200	4.5—5.5t/h	3300 kg	380x500 mm	2.8x1.8x1.8 m	55--75kw

 

 

 

 

 

 

 

 

 

 

 

Zhengzhou professional wood roller crusher for waste wood Features

1. Reasonable design, improves crushing efficiency by 50% compared to traditional type.
2. Attractive appearance, high output of 400-2000kg/h.
3. One motor drives crushing, energy saving and low cost.
4. Crushed materials are fit to process pellets or briquettes.

The Matirals of Zhengzhou professional wood roller crusher for waste wood                         

• Wood crusher can crush tree branches and stems with the diameter of 70mm-250mm.
• Many fiber stalk like bamboo, couch grass, corn and Sorghum stalks are also common wood pellets materials.
• The crushed materials are particles and with diameter of about 3-5mm and can be directly for pelletizing or briquetting.

 

Warm Tips for Zhengzhou professional wood roller crusher for waste wood       

1. The bearings should be injected oil after the machine working for three to four hours.
2. Adjust the tightness of v belt after using for a period, lower 6—10mm is suitable.
3. Clean and examine carefully of every part of the machine, if there is any malfunction, repair in time.