carbonization furnace for making charcoal introduction

The hoist loading carbonization furnace is our new invent, which is also combined type. The charcoal can be hoisted outside, in this way the cooling time can be reduced much, thus, the productive efficiency increases a lot. It is the ideal choice for mass production of charcoal.

The gas produced inside the carbonization chamber flows down through the vertical pipes visible on the outside of the stove. These pipes deliver the gas to the firebox under the chamber to aid combustion and continue heating the carbonization chamber from the outside.

carbonization furnace for making charcoal advantages

The round furnace furnace is our new model, which it works, it is no smoke, no pollution, it is environment-friendly.And get the high density, no smell, no spark charcoal from our furnace.

carbonization furnace for making charcoal usage 

We put materials into the inner pot directly, then put Inner pot into main furnace by hoisting tools or crane, after carbonization8-10hours, hang out Inner pot, let it cool by nature. At the same time, we put another inner pot inside, continue to carbonize next biomass materials.

carbonization furnace for making charcoal details

It adopts a movable steel plate structure, the exhaust pipe of the furnace at the top of turn connection with the tar separator and induced draft fan, with features of a unique structure, the big effective volume, advanced carbonization technology, short carbonization cycle, high output, good environmental conservation, long life etc.

carbonization furnace for making charcoal

model: THL-1

power: no power

capacity: 2-3 tons per 24hours

diameter: inner stove: 1.40m, 1.43m, 1.46m. outer stove:1.85m

height: 2.17m

weight: 5000kg

fuel: 20-30kg firewood or 15kg liquid gas

operation: when one inner pot have been finished carbonization, use the hoisting tools hoist the inner pot from the main furnace, then let the inner pot naturally cooling, at the same time, put another inner pot into the main furnace, which will save a lot of cooling time, so the productivity effect increased a lot.

capacity: we could pit 2 ton raw materials per inner pot, the carbonizing time is 8 hours per inner pot, so we will carbonize 6 tons raw materials, and get 3 tons charcoal.

main structure: there has three inner pots and main furnace per set, we also match hoisting tools or crane for operating. it also has oil collecting tools.

how to operate: we put materials into the inner pot directly, then put inner pot into main furnace by hoisting tools or crane, after carbonizing 8-10 hours, hang out inner pot, let it cool by nature. at the same time, we put another pot inside, continue to carbonize next biomass materials.

warranty: one year

no pollution and no smoke

environment friendly: when carbonizing, there is no smoke and no pollution, there has three reasons:

1, at the beginning of carbonization, the smoke reture to the water box

2, after carbonize about 40 mins, it will produce the gas, the gas will return to main furnace, it get burning.

3, there has special pipe for dealing with tar oil.

packing :
Firstly, we package machine by plastic film to avoid rust.
Secondly, we use fumigation - free wooden case to pack machine. In this way, the machine is uneasy to rust when ship it by sea.

1. 24 hours online service
2. We can design the machine and provide drawing paper depends on your facts
3. Engineer available to install machinery overseas
4. We will pick you up at airport or railway station when you come to visit our factory
Company uphold: honesty, quality first, customer first for the purpose.

   Gongyi Dongxing Machinery company is specialized in the import, export and wholesale biomass charcoal machinery production line, like: wood crusher, sawdust dryer, briquette machine, and carbonization stove,etc. The final briquette or charcoal are best fuel for barbecue or boiler.
Our aim is to supply the market with top quality charcoal equipment, and provide best service and best price for our customer.
Welcome to visit us or free consultancy, networking, and knowledge sharing.
Your trust will give us great help.

(1)What is the carbonization rate? 

This carbonization rate can reach 99%.  

(2)Could you offer complete briquette machine production line?

Yes, we will allocate suitable production line, according to your special requirement, such as crusher, conveyor, dryer, briquette machine, etc.

(3)Where is your factory located? How I get to?

We are located in Gongyi city, Henan province, China, you can come here by air or train. 

The nearest airport is Zhengzhou Xinzheng International Airport, and the Airport Code is CGO

We will pick you up at airport.Welcome to visit our factory.