Carbonization stove charcoal machine
USD $8,000 - $8,500 /Set
Min.Order:1 Set
Gongyi Dongxing Material Trade Co., Ltd.
The information of the Carbonization stove charcoal machine
The Carbonization stove charcoal machine
are used to make charcoal by the materials of wood log, sawdust, leaves coconut shell and so on in a high temperature condition.
It is a dry distillation in a oxygen free atmosphere.The CO, methane and oxygen are produced in this process.
Then we will recycle them by purification treatment and reheat to the Carbonization stove charcoal machine .
Feature:
100% smokeless of the carbonizing precess.
Cooled waste water without ammonia.
Continious carbonizing process.
Special design:
Adjust temperature of the Carbonization stove charcoal machine .
Best wear resistance materials of the Carbonization stove charcoal machine .
Cooling the waste gas by water
The data of the Carbonization stove charcoal machine
Working process of the Charcoal barbecue stove
Drying process
First of all, we use waste wood or gas or others to gasoline to fire the Charcoal barbecue stove . When the temperature goes 180 centi-degree.
The moisture from the wood is removed by the out heating of the gas or wood and the inner heating from the wood itself. There is no chemical reaction of the wood.
Beginning of the carbonizing process
With the times goes on, the wood comes into 280 centi-degree,
the heating mainly comes from the Charcoal barbecue stove itself.
In this process, the wood comes into a thermal decompose reaction.It comes to a chemical reaction.
The hemicellulose are reacted into CO2,CO, and little acetic acid.
The process of the carbonizing process
The temperature goes 300-650 centi degree, the material would be fast heating decomposed into acetic acid, wood tar and methanol and so on.
Meanwhile the methane and the ethylene are produced in this process. This flamability gas will be firing the stove to reheat the furnace.
The wood would be dry distallation process to make charcoal.
The highest point of the carbonizing process
In this process, you have to increase the temperature to 800-1000 centi-degree,the volatile gas would be discharged in the wood, then to increase the carbon content,
the grafite content would be better, the electroproductibility would be better.
Final product of the Carbonization stove charcoal machine
Components of the Carbonization stove charcoal machine
Carbonization stove charcoal machine