50mm and 80mm charcoal briquette making machine price, wood stick machine, cow dung briquette machine
Product Detail
| machine usage | Recycle the agri waste such as biomass,sawdust,stalk,shell,grains,wood |
| working principle | physical screw press briquette machine |
| Briquette diameter | 50/60/70/80mm |
| Raw materail | wood,rice husk,straw,stalk,sawdust,branch and so on |
| Material size | less than 5mm |
| Material moisture | should be around 15% |
| products fuel value | 6500-7000 kcal |
| Features | high density, small size, flammability, and can replace firewood and |
| Package | Fumicated wood box |
| How to make briquette | uses a large screw to grind, compress and extrude the briiquette |
| Product Keywords | charcoal briquette making machine price,wood stick machine,cow dung briquette machine |
What is Features of our charcoal briquette machine/briquette making machine/briqutte press?
1,Charcoal briquette machine used for recycle different kinds( agri-waste such as wood waste,branch,stalk,coconut shell,palm waste,corn waste,cotton stalks,rice husk etcs any kinds waste )to be 50/60/70/80/90mm diameter briquettes
2,The briquette could instand the coal,charcoal for boiler,industry and home burning and warm purpose
3,high quality lowest price,our warrenty is 3 years
How to produce high quality no smoking Charcoal briquette ?
1.Step of briquette making&requirement-- briquette making machine,briquette machine ,briquette press
crushing machine-----drying machine------briquettes machine----briquette ----carbonization machine----charcoal
Moisture:raw material humidity:8-12%
diameter of raw material :less than 5mm
2.How to operate for Charcoal briquette making machine,briquette machine ,briquette press
1)fastening bolts, especially in the heating barrel set of three top wire, connecting and electrical power lines.
2)check bearing lubrication part.
3)check the supply voltage is normal.
4)no-load starting running 30 minutes, no card, touch the abnormal phenomenon, can be put into normal production.When the trial revealed abnormalities, should immediately stop, find out the reasons, troubleshooting and then makes no-load operation.
5)the temperature regulator adjusted to the required temperature, when the temperature reaches a predetermined temperature before starting, and amount of feed.
6)gradually increased feeding rate, until the production of qualified products, produced when the normal 30 minutes, can show trial run is successful, the normal operation of.
At the end of 7 to make the hopper feeder with no raw material , and after shutting down the machine immediately reversed for 1 minutes, so that the propeller material would be exit.
The machine body must be well grounded!
What is the spare part for our briquette making machine,briquette machine ,briquette press ?
How to produce no smoking Charcoal?
PACKAGE:
Standard export shipping container
DELIVERY TIME:
3-10 days
50-90mm diameter briquette machine
coal bar machine