high density briquetter used, compressed charcoal, wood brick machine
USD $2,000 - $2,600 /Set
Min.Order:1 Set
Henan Name Brand Machinery Co., Ltd.
Chinese compressed charcoal, Charcoal Briquette Extruder Machine, hookah charcoal for equipment
Professional coal press machine,coal briquette production line,bamboo charcoal briquettes
agri machine coal briquetting equipments, machine made charcoal, coal pellet machine
99% rate carbide furnace smoking kiln, charcoal furnace, coconut shell activated carbon machine
screw type machine briquette de charbon, automatic power press machine, machine made charcoal
machine usage | Recycle the agri waste such as biomass,sawdust,stalk,shell,grains,wood |
working principle | physical screw press briquette machine |
Briquette diameter | 50/60/70/80mm |
Raw materail | wood,rice husk,straw,stalk,sawdust,branch and so on |
Material size | less than 5mm |
Material moisture | should be around 15% |
products fuel value | 6500-7000 kcal |
Features | high density, small size, flammability, and can replace firewood and |
Package | Fumicated wood box |
How to make briquette | uses a large screw to grind, compress and extrude the briiquette |
Product Keywords | briquetter used,compressed charcoal,wood brick machine |
1,Charcoal briquette machine used for recycle different kinds( agri-waste such as wood waste,branch,stalk,coconut shell,palm waste,corn waste,cotton stalks,rice husk etcs any kinds waste )to be 50/60/70/80/90mm diameter briquettes
2,The briquette could instand the coal,charcoal for boiler,industry and home burning and warm purpose
3,high quality lowest price,our warrenty is 3 years
1.Step of briquette making&requirement-- briquette making machine,briquette machine ,briquette press
crushing machine-----drying machine------briquettes machine----briquette ----carbonization machine----charcoal
Moisture:raw material humidity:8-12%
diameter of raw material :less than 5mm
2.How to operate for Charcoal briquette making machine,briquette machine ,briquette press
1)fastening bolts, especially in the heating barrel set of three top wire, connecting and electrical power lines.
2)check bearing lubrication part.
3)check the supply voltage is normal.
4)no-load starting running 30 minutes, no card, touch the abnormal phenomenon, can be put into normal production.When the trial revealed abnormalities, should immediately stop, find out the reasons, troubleshooting and then makes no-load operation.
5)the temperature regulator adjusted to the required temperature, when the temperature reaches a predetermined temperature before starting, and amount of feed.
6)gradually increased feeding rate, until the production of qualified products, produced when the normal 30 minutes, can show trial run is successful, the normal operation of.
At the end of 7 to make the hopper feeder with no raw material , and after shutting down the machine immediately reversed for 1 minutes, so that the propeller material would be exit.
The machine body must be well grounded!
Standard export shipping container
3-10 days