Product Details

Microduct Connector

Product Description

Brief Introduction:

The Push-Fit Connectors make splicing Micro Duct fast and easy. Simply push the Micro Ducts into the center of the coupling. No tools are required. The coupler can be connected and disconnected 10 times and still maintain the high performance requirements for air blown installation systems.

Push-Fit Micro Duct connector operate at 15 BAR (218 psi) with a maximum permissible leakage rate of 1cc/min. This is equivalent to 1 bubble every 3 seconds. Higher pressures have been used in the field with no increase in leakage rate. Quick Burst rating is 25 BARS (363 psi).

Specification:

Model No.	Part Name	Blow Pressure	Pull Strength For HDPE tube	Pull Strength For LSZH tube	Life time
FMC-S-0535	5/3.5mm connector	>18bar	≥350N	>150N	10 Years
FMC-S-0755	7/5.5mm connector	>18bar	≥350N	>150N	10 Years
FMC-S-0735	7/3.5mm connector	>18bar	≥350N	>150N	10 Years
FMC-S-0835	8/3.5mm connector	>18bar	≥350N	>150N	10 Years
FMC-S-0855	8/5.5mm connector	>18bar	≥350N	>150N	10 Years
FMC-S-1008	10/8 mm connector	>18bar	≥350N	>150N	10 Years
FMC-S-1210	12/10mm connector	>18bar	≥350N	>150N	10 Years
FMC-S-1410	14/10mm connector	>18bar	≥350N	>150N	10 Years
FMC-S-1612	16/12mm connector	>18bar	≥350N	>150N	10 Years
FMC-S-1614	16/14mm connector	>18bar	≥350N	>150N	10 Years