Name: FCST1410401 FCST Air blowing cable for HDPE micro duct fiber unit 8 cores
Brand: FCST
Availability: InStock

Product Details

FCST1410401 Air Blowing Cable Fiber Unit Fiber Bundle

Product Description

Features and Benefits:

Product Picture:

Standards:

Unless otherwise specified in this specification, all requirements shall be mainly in accordance with the following standard specifications.

Optical Fibre …... ITU-T G.651,G.652,G.655,G.657

IEC 60793-2-10,IEC 60793-2-50

Optical Cable ……IEC 60794-1-2,IEC 60794-5

Technical Parameter

Basic Performance

Fibre Count	2 Fibres	4 Fibres	6 Fibres	8 Fibres	12 Fibres
Outer Diameter (mm)	1.15±0.05	1.15±0.05	1.35±0.05	1.50±0.05	1.65±0.05
Weight (g/m)	1.0	1.0	1.3	1.8	2.2
Min Bend radius (mm)	50	50	60	80	80
Temperature	Storage:-30°C~ +60°C Operation:-20°C~ +60°C Installation:-5°C~ +50°C

Testing parameter

Fibre Unit Attenuation

Fibre Type

SM G.652D,G.655,G.657

MM 62.5/125

MM 50/125,OM3

Attenuation

0.38dB/km max @1310nm

0.26dB/km max @1550nm

3.5dB/km max @850nm

1.5dB/km max @1300nm

3.0dB/km max @850nm

1.0dB/km max @1300nm

Blowing Test

Fibre Count	2 Fibres	4 Fibres	6 Fibres	8 Fibres	12 Fibres
Test equipment	PLUMETTAZ:UM25, ERICSSON:F, CATWAY:FBT-1.1
Standard duct	5.0/3.5 mm
Pressure	7bar / 10bar
Typical blowing distance	500m / 1000 m	500m / 1000m	500m / 1000m	500m / 1000m	500m / 800m
Typical blowing time	10 min / 18 min	10 min / 18 min	12 min / 18 min	13 min / 18 min	15 min / 20 min

Mechanical Performance

Test	Standard	Parameters	Test Results
Tension	IEC 60794-1-2-E1	Load is 1×W	fibre strain ≤0.4% at MAX Additional attenuation ≤0.05dB fibre strain ≤0.05% after test
Bend	IEC 60794-1-2-E11A	Diam 40mm×3turns 5 cycles at 20°C	Additional attenuation ≤0.05dB,after test
Crush	IEC 60794-1-2-E3	100 N, 60s	Additional attenuation ≤0.05dB,after test
*All optical testing proceeded at 1550 nm*