Name: FCST1410601 Air Blown Fiber Unit(ABF) 12cores
Brand: FCST
Availability: InStock

Product Details

Introduction

FCST1410601 Air Blown Fiber Unit(ABF) 12cores

l The ABF is the product that with small diameter, lightweight, highly flexibility and proper stiffness, and it can be blown into the micro duct of 5.0/3.5mm. The fiber are coated with a soft acrylate resin which provides excellent dimensional and thermal stability to cushion the fibers, in addition, the resin can be easily stripped in connecting the fiber. The outer sheath is a thermoplastic that is of low friction. The surface of the sheath is designed with special grooves, compared to the surface of the traditional optical fiber cable, it provides not only the high level of mechanical protection, but also the perfect blowing performance.

Features and Benefit

l 2,4,6,8 and 12 fibers options.

l Stable structure, good mechanical and temperature performance.

l Designed with special grooves to advance blowing distance.

l Lightweight and proper stiffness , repeat installation.

l Designed with no gel, easy stripping and handling.

l Better costs advantage compared to traditional product.

l Complete accessories, less manpower, lower installation time.

Standards

Unless otherwise specified in this specification, all requirements shall be mainly in accordance with the following standard specifications.

l Optical fiber …...ITU-T G.651,G.652,G.655,G.657 IEC 60793-2-10,IEC 60793-2-50

l Optical Cable ……IEC 60794-1-2,IEC 60794-5

Technical Parameter

Fiber Unit Structure:

1. Optical fiber

2. Resin

3. +1 ‘Filled’ fiber

4. Low Friction Sheath

5. Groove

Note: It is recommended that the structure of 2 fibers unit consist of 2 filled fibers, for it is proved that this structure is better in the blowing performance and the fiber separability than that of one with zero or one filled fiber

Basic Performance

fiber Count	2 fibers	4 fibers	6 fibers	8 fibers	12 fibers
Outer Diameter (mm)	1.15±0.05	1.15±0.05	1.35±0.05	1.50±0.05	1.65±0.05
Weight (g/m)	1.0	1.0	1.3	1.8	2.2
Min Bend radius (mm)	50	50	60	80	80
Temperature	Storage:-30℃ ~ +60℃ Operation:-20℃ ~ +60℃ Installation:-5℃ ~ +50℃

Testing parameter

Fiber Unit Attenuation:

fiber Type

SM G.652D,G.655,G.657

MM 62.5/125

MM 50/125,OM3

Attenuation

0.38dB/km max @1310nm

0.26dB/km max @1550nm

3.5dB/km max @850nm

1.5dB/km max @1300nm

3.0dB/km max @850nm

1.0dB/km max @1300nm

Blowing Test:

Fib re Count	2 fibers	4 fibers	6 fibers	8 fibers	12 fibers
Test equipment	PLUMETTAZ:UM25, ERICSSON:F, CATWAY:FBT-1.1
Standard duct	5.0/3.5 mm
Pressure	7bar / 10bar
Typical blowing distance	500m / 1000 m	500m / 1000m	500m / 1000m	500m / 1000m	500m / 800m
Blowing time	10 min / 18 min	10 min / 18 min	12 min / 18 min	13 min / 18 min	15 min / 20 min

Mechanical Performance:

Test	Standard	Parameters	Test Results
Tension	IEC 60794-1-2-E1	Load is 1×W	fiber strain ≤0.4% at MAX Additional attenuation ≤0.05dB fiber strain ≤0.05% after test
Bend	IEC 60794-1-2-E11A	Diam 40mm×3turns 5 cycles at 20℃	Additional attenuation ≤0.05dB,after test
Crush	IEC 60794-1-2-E3	100 N, 60s	Additional attenuation ≤0.05dB,after test
All optical testing proceeded at 1550 nm

Free coiling in the pan.

fiber Count	Length (m)	Drum Size Φ×H (mm)	Weight (Gross) (kg)
2~4 fibers	2000 m	φ560 × 120	8.0
2~4 fibers	4000 m	φ560 × 180	10.0
6 fibers	2000 m	φ560 × 180	9.0
6 fibers	4000 m	φ560 × 240	12.0
8 fibers	2000 m	φ560 × 180	10.0
8 fibers	4000 m	φ560 × 240	14.0
12 fibers	1000 m	φ560 × 120	8.0
	2000 m	φ560 × 180	10.5
	4000 m	φ560 × 240	15.0

Exhibition: