Name: FCST152FCST air-blown solution end stop connector for micro duct,end cap
Brand: FCST
Availability: InStock

Product Details

FCST15201 Micro Duct End Cap

Product Description

Brief Introduction:

To keep Micro Duct networks free of debris, seal the system with Push

Fit End Caps. With the same functionality as the Push-Fit Connectors, installation simply involves pushing the Micro Duct into the End Cap. The End Cap can be attached and removed 10 times while still maintaining the same high performance characteristics.

Push-Fit Micro Duct End Stop Connector operate at 15 BAR (218 psi) with a maximum permissible leakage rate of 1cc/min. This is equivalent to 1 bubble every 3 seconds. Higher pressures have been used in the field with no increase in leakage rate. Quick Burst rating is 25 BARS (363 psi).

Specification:

Model No.	Part Name	Blow Pressure	Pull Strength For HDPE tube	Pull Strength For LSZH tube	Life time
FCST15201	3 mm DI end stop	>18bar	≥350N	>150N	10 Years
FCST15202	4 mm DI end stop	>18bar	≥350N	>150N	10 Years
FCST15203	5 mm DI end stop	>18bar	≥350N	>150N	10 Years
FCST15204	6 mm DI end stop	>18bar	≥350N	>150N	10 Years
FCST15205	7 mm DI end stop	>18bar	≥350N	>150N	10 Years
FCST15206	8 mm DI end stop	>18bar	≥350N	>150N	10 Years
FCST15207	10 mm DI end stop	>18bar	≥350N	>150N	10 Years
FCST15208	12 mm DI end stop	>18bar	≥350N	>150N	10 Years
FCST15209	14 mm DI end stop	>18bar	≥350N	>150N	10 Years
FCST15210	16 mm DI end stop	>18bar	≥350N	>150N	10 Years