Product Details

Micro Duct End Cap

Product Description

Brief Introduction:

To keep Micro Duct networks free of debris, seal the system with Push

Fit End Caps. With the same functionality as the Push-Fit Connectors, installation simply involves pushing the Micro Duct into the End Cap. The End Cap can be attached and removed 10 times while still maintaining the same high performance characteristics.

Push-Fit Micro Duct End Stop Connector operate at 15 BAR (218 psi) with a maximum permissible leakage rate of 1cc/min. This is equivalent to 1 bubble every 3 seconds. Higher pressures have been used in the field with no increase in leakage rate. Quick Burst rating is 25 BARS (363 psi).

Product Picture:

Specification:

Model No.	Part Name	Blow Pressure	Pull Strength For HDPE tube	Pull Strength For LSZH tube	Life time
FMC-E-03	3 mm DI end stop	>18bar	≥350N	>150N	10 Years
FMC-E-04	4 mm DI end stop	>18bar	≥350N	>150N	10 Years
FMC-E-05	5 mm DI end stop	>18bar	≥350N	>150N	10 Years
FMC-E-06	6 mm DI end stop	>18bar	≥350N	>150N	10 Years
FMC-E-07	7 mm DI end stop	>18bar	≥350N	>150N	10 Years
FMC-E-08	8 mm DI end stop	>18bar	≥350N	>150N	10 Years
FMC-E-10	10 mm DI end stop	>18bar	≥350N	>150N	10 Years
FMC-E-12	12 mm DI end stop	>18bar	≥350N	>150N	10 Years
FMC-E-14	14 mm DI end stop	>18bar	≥350N	>150N	10 Years
FMC-E-16	16 mm DI end stop	>18bar	≥350N	>150N	10 Years