Switching Power Supply, buy 24V 8.3A single switching power supply(S-201-24) on China Suppliers Mobile

Product Details

Specifications

24V 8.3A single switching power supply(S-201-24)
CE certificate, better rediating effect
competitve price, high quality

24V 8.3A single switching power supply(S-201-24)

Competitived price and hith reliability

105^oC Output capacitor
AC input power suitable for the world
High efficiency and low operation temperature
Soft-start current can reduce the AC input impact effecticly
With short-circuit and overload protection
Compact size, ligh weight
100% full-load burn-in test
Installed with EMI filter, minimum wave

Model	S-201-5	S-201-7.5	S-201-12	S-201-13.5	S-201-15	S-201-24	S-201-27	S-201-48
DC output voltage	5V	7.5V	12V	13.5V	15V	24V	27V	48V
Output voltage range(Note:2)	±2%	±2%	±1%	±1%	±1%	±1%	±1%	±1%
Rated output current	40A	26.5A	16.5A	14.7A	13A	8.3A	7.4A	4.2A
Output current range	0-40A	0-26.5A	0-16.5A	0-14.7A	0-13A	0-8.3A	0-7.4A	0-4.2A
Wave and noise(Note:3)	150mVp-p	150mVp-p	150mVp-p	150mVp-p	150mVp-p	150mVp-p	200mVp-p	240mVp-p
Inlet stability(Note:4)	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
Load stability(Note:5)	±1%	±1%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
DC output power	200W	198.75W	198W	198.45W	198W	199.2W	199.8W	201.6W
Efficiency	74%	79%	80%	80%	81%	83%	83%	84%
Adjustable range for DC voltage	4.5~5.6V	6~9V	10~13.2V	12~15V	13.5~18V	20~26.4V	26~32V	41~56V
Input current	3.6A/115V 1.8A/230V
AC inrush current	25A/115V50A/230V
Leakage current	<3.5mA/240VAC
Overload protection	105%~150% Type: pulsing hiccup shutdown Reset: auto recovery
High-temperature protection	ERH3≥90°c output shutdown
Temperature coefficient	±0.03%/°c(0~50°c)
Setup, rise , hold up time	200ms,100ms, 20ms
Vibration	10~500Hz, 2G 10min,/1cycle, Period for 60min, Each axes
Withstand voltage	Input and output internal: 1.5KvAC, Input and enclosure:1.5KvAC, Output and enclosure:0.5KvAC
Working temperature and humidity	-10°c~+60°c(Refer to output derating curve), 20%~90%RH
Weight	0.9Kgs
Safety standards	Design ferer to UL 1950
EMC standards	Design refer to FCC Part15 J Part15J classA
Note: 1. The testing condition for the parameter above is: 230VAC input, rated load, 25°c 70% RH.Temperatuer. 2. Error: include the setting error, line stability and load stability.(Note:5). 3.Wave test: adopting "A12" double wire for 20 MHz, and 0.1 UF&47UF capacitor short-circuit for interrupting. 4. Inlet voltage stability test: wht is overload, the lowest voltage of inlet is up to the highest voltage. 5. Load stability test: The load is from 0% to 100%