forging manipulator
USD $1 - $50,000 /Set
Min.Order:1 Set
Shandong Binzhou Forging And Pressing Machinery Factory
DYH-0.6S forging manipulator has a good view, turning flexible and cohesive, and has a good performance, and it is one of the most advanced equipment in the forging industry. It can used together with 750kg pneumatic forging hammer, or 1000-2000kg steamed empty dual-use hammer or other corresponding tonnage of hammer, it is needed in the forging industry. DYH-0.6S is operated throughout hydraulic transmission, each Movement system is adjusted by every speed.
The major movements as follows:
1, the cart can go forward and back
2, the platform can turnaround in 360°
3, tongs pole can turn
4, tongs pole can parallel movement (up and down)
5, tongs pole can incline
6, clamp
main technical parameters | |
Nominal load weight | 0.6t |
Rescue moment | 8820N.m |
Holding round material diameter | Φ90-380mm |
Holding square material diameter | 90-340mm |
Clamp rod center height | 775-1200mm |
Clamp rod overhang | 1200mm |
Rail distance | 1200mm |
cart radius of gyration | 2100mm |
Clamp radius of gyration | 775mm |
Manipulator run speed | 0-45m/min |
Clamp slew speed | 0-30r/min |
Clamp parallel lifting speed | 0-6 m/min |
Clamp incline speed | 0-6 m/min |
Platform slew speed | 0-4r/min |
Clamp up-incline angle | 10° |
Clamp down-incline angle | 22° |