DYH-0.6S forging manipulator has a good view, turning flexible and cohesive, and has a good performance, and it is one of the most advanced equipment in the forging industry. It can used together with 750kg pneumatic forging hammer, or 1000-2000kg steamed empty dual-use hammer or other corresponding tonnage of hammer, it is needed in the forging industry. DYH-0.6S is operated throughout hydraulic transmission, each Movement system is adjusted by every speed.

The major movements as follows:     

1, the cart can go forward and back

2, the platform can turnaround  in 360°

3, tongs pole can turn

4, tongs pole can parallel movement (up and down)  

5, tongs pole can incline

6, clamp

 

main technical parameters
Nominal load weight	0.6t
Rescue moment	8820N.m
Holding round material diameter	Φ90-380mm
Holding square material diameter	90-340mm
Clamp rod center height	775-1200mm
Clamp rod overhang	1200mm
Rail distance	1200mm
cart radius of gyration	2100mm
Clamp  radius of gyration	775mm
Manipulator run speed	0-45m/min
Clamp slew speed	0-30r/min
Clamp parallel lifting speed	0-6 m/min
Clamp incline speed	0-6 m/min
Platform slew speed	0-4r/min
Clamp up-incline angle	10°
Clamp down-incline angle	22°