Product Details

jewellery gold coating machine

-------------------------------------------------------------------------------------------------------------------------------------------

Set up of arc deposition system:

Door

Chamber

High vacuum pumping system

Vacuum measuring and control

Fixtures moving system(Custom made)

Arc deposition cathodes device

Control unit of the system

Double Stainless steel liner set

High power arc power source

Bias power source

Iron frame

-------------------------------------------------------------------------------------------------------------------------------------------

This is a new arc ion plating system specially designed for tool coating. The vacuum chamber is a vertical barrel with a front door.

Vacuum Chamber:

Chamber cover can be disassemble and has a workpiece jig on it. There is a front door on chamber for loading and unloading of workpieces. There is one observation port on the door.

The chamber body and front door are whole water jacket structured and made of stainless steel.

There is a square-shaped flange hole for connection with vacuum system. On barrel bottom,

there are several flanges: one for installation of heater, two for gas supply and one for thermocouple.

Inside the barrel, there is a stainless neck bush to keep chamber clean. It is easily disassemble and convenient for regular clean.

The chamber is placed on a rectangle chassis which has gas supply system, side water cooling system, cables of system control and power supply. The chassis is made of carbon steel and painted with anti-corrosive paint.

Vacuum Degassing System

Vacuum system consists of following devices to meet requirement of pump down.

Rotary vane vacuum pump

Oil diffusion pump(ODP)

Roots pump

Besides pumps, the system also has valves, connecting popes,cryotrapping and instruments for measurement. Instruments for measurement is a thermocouple and ionization combined pressure gauge with pressure range 10^-3 Pa to 10^-4 Pa. It can switch from thermocouple gauge to ionization gauge automatically.

Gas supply system

Two or three kinds of gases can be inlet into the system for plating. Each inlet has necessary stop valve and control flow controller. Flow range is 0 to 500sccm for each inlet.

Heating System

The system has a tube-shaped heater and connected power

Temperature measurement

Temperature measurement is by thermocouple thermosistor placed inside vacuum chamber. It can detect environment temperature of chamber. For detecting surface temperature of workpiece, customer can choose infrared thermosistor.

Control System

There are two control systems for customer's choice: semi-automatic control or automatic control.

-------------------------------------------------------------------------------------------------------------------------------------------

Name of the machine	Physical Vapor Deposition Vacuum Arc Deposition Machine
HS Code	8543300090
Available coatings	Titanium, Chrome, TiN, TiCN, etc
Available base materials	metals, ceramic, glass
Available Industries	Hardware, tools,medical industry, porcelain mosaics, etc
Application	PVD Tools coating PVD Decorative coating on metal products
Original coatings color	Silver, Golden, Brass, Black, etc

---------------------------------------------------------------------------------------------------

Main Applications

You may interested in the PVD coating machine for the following applications(direct link):	Running Videos(links to the videos) (Please copy the link to the browser address bar for video watching.)
Aluminum or silver mirror making	/v_show/id_XODM0NzY3NDky.html	/v_show/id_XODM0Njk1OTM2.html
ITO conductive glass	/v_show/id_XNjg2NTIwNzQ4.html	/v_show/id_XNjg1MTk0NDI4.html
Low-E glass coating
Solar Tubes coating
Plastic metallizing	/v_show/id_XNzE1MDY3NzIw.html	/v_show/id_XNDY2OTQ0MDky.html
Headlamp metallzing
Christmas Balls metallizing
Shoe Heel metallizing	/v_show/id_XNzE1MDQyMzQw.html
Food grade coatings for plastic cutleries	/v_show/id_XNDI2NDU5MDQw.html	/v_show/id_XNDI1ODkzODI0.html
Tools or hardwares coating	/v_show/id_XNjA3NzA5MTcy.html	/v_show/id_XNDA0MzYwNzky.html
Stainless steel sheets with TiN coatings	/v_show/id_XMTkxMjY2MjUy.html
Jewelry
Ceramic tiles coating
Mosaic coating	/v_show/id_XNDA0Mjg5MTU2.html

Our Services

Before sales:

Our engineers are ready to provide custom made design and recommendation for each customer's case.
We provide professional consulting service for PVD coaters and lines.
We also have set up good relations with the suppliers of relative consumables and parts for your needs.

After-sales

We will send the engineers to your place for installation, fine tune and for operation training.
We will provide troubleshooting service all lifetime.
The warranty period of the machine is 1 year.
We will contact you to ask for about the conditions of the machine in periodically.
We also provide the service for further extension on your existing machine.

FAQ

Question 1: Are you manufacturer?

Answer: Yes, we are. Welcome to visit our factory!

Question 2: What is price of the machine?

Answer:

The machine is custom made. If you have any drawing or any information on specification of the machine, please send to us for quote.

If you are totally new in this area, please tell us the max. dimension of your products, its application, and your desired capacity.

We will provide our professional suggestions and work out an appropriate design for your project.

Question 3: What do I have to do for my products before processing by the vacuum coater?

Answer: In vacuum area, the products(we call it"substrate") have to be CLEAN, DRY AND SMOOTH. So we will need washer and dryer, sometimes base varnish, and topcoat to protect the coatings.

Question 4: Do I have to pay the costs for pollution?

Answer: The machine is environment-friendly, there is no liquid chemical waste and harmful gas. This is a kind of green technology.

Inquiry Guides

Dear Customer: :-)

Good day.

When you are going to send us a inquiry, in order to design the most appropriate machine for your project, please answer the following questions in your letter:

1. What is your product, its material and application

2. What is the possible max. dimension of your product

3. What is your desired productivity per 8 hours/shift.

The answers to the above question will help us a lot on designing or do the recommendation.

Please send the inquiry at the bottom of this page.

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Thanks for your kind attention.