Main Products: POM Plastics ,Acrylic Plastics ,Bakelite Plastics ,Epoxy Sheet &Rod Plastics
white high quality polypropylene pp sheets
USD $1.89 - $5.38 /Kilogram
Min.Order:50 Kilograms
Quick Details View All >
Shenzhen Fuxinhua Insulation Material Co., Ltd.
Business Type: Manufacturer
Shenzhen Guangdong ChinaMain Products: POM Plastics ,Acrylic Plastics ,Bakelite Plastics ,Epoxy Sheet &Rod PlasticsProduct Details
white high quality polypropylene pp sheets
Specifications:
1, Thickness: 1-50mm
2, Size: 1000x2000mm
3, ROHS SGS certificate.
4, High gloss and hard surface.
5. Providing services in die cutting holing, punching, slitting as customer's request.
Product description:
PP is a non-toxic,non smell ,low density material .It has better strength ,rigidity and heat resistance than PE.Its operating temperature is about 100ºC.It has outstanding electrical properties and high frequency insulating properties.As a result ,it is suitable to make the general industrial parts ,chemical resistant parts and insulation parts
Product Features:
-Good tensile strength
-Good fatigue resistance
-Nice chemical resistance
-Good electrical properties
-Good insulation
-Low density
-Environmental protective
-Food safe
-Can boil in high temperature
Product Application:
Chemical resistant parts
Insulation parts
Home appliances shell, wire and cable
Floor of swimming pool
Property Data:
| PROPERTIES | Test Method | Unit | Value |
| I.Physical Properties | |||
| Density | ISO 1183 | g/cm3 | 0.91 |
| Water absorption 24hrs | ISO 62 | % | 0.01 |
| II.Thermal Properties | |||
| Heat deflection temperature - HDT/A | ISO 75A | ºC | 65 |
| Min. service temperature | ºC | -30 | |
| Max. service temperature | ºC | 100 | |
| Thermal conductivity at 23 ºC | DIN 11359 | W/(K*m) | 0.22 |
| Coefficient of linear thermal expansion | ISO 11359 | 10-4*K-1 | 1.7 |
| Flammability Rating(6mm thickness) | UL 94 | - | HB |
| III.Mechanical Properties at 23ºC | |||
| Tensile strength at yield | ISO 527-2 | MPa | 30 |
| Tensile strength at break | ISO 527-2 | Mpa | - |
| Elongation at break | ISO 527-2 | % | 50 |
| Modulus of elasticity after tensile test | ISO 527-2 | MPa | 1,600 |
| Modulus of elasticity after flexural test | ISO 178 | MPa | - |
| Hardness - Shore D | DIN 53505 | 70 | |
| Charpy impact strength | ISO 179 | kJ/m2 | N. B. |
| Friction coefficient | DIN 53375 | 0.3 | |
| IV.Electrical Properties at 23ºC | |||
| Dielectric constant at 1 MHz | IEC 60250 | 106Hz | 2.3 |
| Dielectric loss factor at 1 MHz | IEC 60250 | 106Hz | 0.0002 |
| Volume resistively | IEC 60093 | Ohm (Ω) * cm | >1016 |
| Surface resisively | IEC 60093 | Ohm (Ω) | >1013 |
| Dielectric strength | IEC 60243-1 | kV/mm | 40 |
| NOTE: 1 g/cm3 = 1,000 kg/m3, 1 Mpa = 1 N/mm2, 1kV/mm = 1 MV/m | |||
| Statement: | |||
| Property data contained herein are typical values of resin for your reference and comparison purposes only. PRIOR will not provide any legally binding guarantee of certain properties, or any suitability. | |||
About:
Our Advantage:
Factory Display:
Certificate Display:
Our Market:
FAQ:
Contact:
Betty Cheng
skype: fuxinhua11
phone: +86 13265485626
whatsapp:+86 15623564911
Shenzhen Fuxinhua Insulation Material Co., Ltd
Welcome ur visit our factory!
Contact Supplier
You May Like
New Products
Popular Searches
Recommended Products
Find Similar Products By Category
Facebook
X
Pinterest
Linkedln