Product Details

0.5mm colored polypropylene sheet

Specifications:

1, Thickness: 0.2-1.2 mm

2, Size: 62x43cm, 31x21.5cm, or customized size

3, ROHS SGS certificate.

4, High gloss and matte finish.

5. Providing services in die cutting holing, punching, slitting as customer's request.

Product description:

PP is a non-toxic,non smell ,low density material .It has better strength ,rigidity and heat resistance than PE.Its operating temperature is about 100ºC.It has outstanding electrical properties and high frequency insulating properties.As a result ,it is suitable to make the general industrial parts ,chemical resistant parts and insulation parts

Product Features:

-Good tensile strength
-Good fatigue resistance
-Nice chemical resistance
-Good electrical properties
-Good insulation
-Low density
-Environmental protective
-Food safe
-Can boil in high temperature

Product Application:

Chemical resistant parts
Insulation parts
Home appliances shell, wire and cable
Floor of swimming pool

Property Data:

PROPERTIES	Test Method	Unit	Value
I.Physical Properties
Density	ISO 1183	g/cm3	0.91
Water absorption 24hrs	ISO 62	%	0.01
II.Thermal Properties
Heat deflection temperature - HDT/A	ISO 75A	ºC	65
Min. service temperature		ºC	-30
Max. service temperature		ºC	100
Thermal conductivity at 23 ºC	DIN 11359	W/(K*m)	0.22
Coefficient of linear thermal expansion	ISO 11359	10-4*K-1	1.7
Flammability Rating(6mm thickness)	UL 94	-	HB
III.Mechanical Properties at 23ºC
Tensile strength at yield	ISO 527-2	MPa	30
Tensile strength at break	ISO 527-2	Mpa	-
Elongation at break	ISO 527-2	%	50
Modulus of elasticity after tensile test	ISO 527-2	MPa	1,600
Modulus of elasticity after flexural test	ISO 178	MPa	-
Hardness - Shore D	DIN 53505		70
Charpy impact strength	ISO 179	kJ/m2	N. B.
Friction coefficient	DIN 53375		0.3
IV.Electrical Properties at 23ºC
Dielectric constant at 1 MHz	IEC 60250	106Hz	2.3
Dielectric loss factor at 1 MHz	IEC 60250	106Hz	0.0002
Volume resistively	IEC 60093	Ohm (Ω) * cm	>1016
Surface resisively	IEC 60093	Ohm (Ω)	>1013
Dielectric strength	IEC 60243-1	kV/mm	40
NOTE: 1 g/cm3 = 1,000 kg/m3, 1 Mpa = 1 N/mm2, 1kV/mm = 1 MV/m

Statement:
Property data contained herein are typical values of resin for your reference and comparison purposes only. PRIOR will not provide any legally binding guarantee of certain properties, or any suitability.