MADE IN TAIWAN VARNISH FOR METAL COATING CAR VARNISH PRICE
USD $18.54 - $27.6 /Set
Min.Order:300 Sets
(N-TYPE) MADE IN TAIWAN PAINT PROTECTION VARNISH PAINT BRANDS
(N-TYPE) MADE IN TAIWAN 2K ACRYLIC CLEAR COAT ANTI UV COATING
(N-TYPE) MADE IN TAIWAN HIGH GLOSS FINISH CLEAR VARNISH PAINT
(N-TYPE) MADE IN TAIWAN GLOSS PAINT CLEAR COAT 2K VARNISH PAINT
(N-TYPE) MADE IN TAIWAN INDUSTRIAL VARNISH LACQUER COATING CAR CLEAR COAT
(N-TYPE) MADE IN TAIWAN HIGH GLOSS FINISH CLEAR PAINT CLEAR VARNISH
MADE IN TAIWAN VARNISH FOR METAL COATING CAR VARNISH PRICE
POLYURETHANE CLEAR COATING (N-TYPE) | |
TYPE | A two-pack, non-yellowing clear paint based on acrylic resin, polyol resin polymer and polyisocyanate hardener. |
USES | Clear topcoat for metalware and woodenware such as furniture, musical instruments, handicrafts, sports equipment etc. |
CHARACTERISTICS | 1. High gloss and hardness, good gloss and color retention. 2. Excellent adhesion for wooden and metal wares. 3. Excellent abrasive and heat resistance. |
GLOSS | Above 90% |
APPEARANCE | Clear liquid |
WEIGHT | Above 1.0 kg/L (Mixer) |
VISCOSITY (25 ℃) | 55~80 KU ( mixture, 25℃ ) |
OPTIMUM FILM THICKNESS | Wet 50 microns Dry 25 microns |
MIXER RATIO | Base : hardener = 2 : 1 (by volume) |
DRYING TIME (25 ℃) | Set-to-touch 2 hr. Dry hard 8 hrs. (25 ℃). |
NON-VOLATILE CONTENT | Above 50% ( mixture ) |
POT LIFE | 4 hrs. ( mixture, 25℃ ) |
THINNER | PU thinner |
THINNING RATE | 5~20 % |
STORAGE SHELF LIFE | Minimum 1 year under normal storage conditions. |
APPLICATION METHOD | Spray, Brush |
NOTE | 1. Mix base and hardener according to the mixing ratio and stir thoroughly. 2. Adhered moisture, grease, and dirt on substrate must be cleaned thoroughly. 3. Use specified thinner to avoid formation of bubbles and pinholes. 4. The lid of hardener barrel must be tightly closed to prevent the contact with moisture in the air to avoid generating bubbles and gel. 5. The mixture must be available within the pot life. 6. The sprayed thickness of paint film exceeded 50microns per coat that is easy to generate bubbles. It must be done effective control when applied. 7. All equipment must be thoroughly cleaned immediately after use to avoid gel. 8. The brushing type can also be applied by roller, but to roll the polyurethane or fluorocarbon paints, the film thickness is easy too thick to generate small bubbles. It shall pay special attention to. |