HEAT-RESISTING PAINT, 200 °C

TYPE

Heat-resisting paint based on special resins with aluminum pigment.

USES

Chimney, mold, steam pipes and general plant equipment of high temperature.

CHARACTERISTICS

1. Having good heat resistance to 200 °C

2. Good weather resistance.

3. Good adhesion.

4. Easy application.

APPLICATION METHID

Spray, Brush.

COLOR

Silver

SPECIFIC GRAVITY

Above 0.95kg/L

VISCOSITY (25°C)

55 ~70 KU

DRYING TIME (25°C)

Set-to-touch 2hr.

Dry hard 6 hrs.

OPTIMUM FILM THICKNESS

Wet 50 microns

Dry 20 microns

VOLUME SOLIDS

Above 40%

THINNER

Xylene

THINNING RATE

5 ~15 %(by wt.)

STORAGE SHELF LIFE

Minimum 1 year under normal storage

NOTES

1.Moisture, greases, sludge, old paint and rust must be thoroughly

    removed from substrate, preferably sand blast to the standard above

    SIS Sa 2.

2. Principally, painting should be conducted at ambient temperature,

    blistering and sapling are apt to occur when substrate temperature

    exceeds 60°C

3. After completion of painting, slowly heat up to half of service

    temperature and keep for one hour, and then raise to service  

    temperature. Direct heating up to maximum service temperature

    would surely induce blistering or sapling.