Name: Handheld 200MHz 1GSa/s 2Channels Oscilloscope Scopemeter Multimeter 2in1 USB 5.6'' TFT LCD High Resolution 640x480 DSO1202B
Brand: Hantek
Availability: InStock

Product Details

Handheld 200MHz 1GSa/s 2Channels Oscilloscope Scopemeter Multimeter 2in1 USB 5.6'' TFT LCD High Resolution 640x480 DSO1202B

Features:

High bandwidth 60MHz-200MHz Oscilloscope,1GS/s sample rate, and 6000 counts DMM with analog bargraph
1M memory depth
High refresh rate (2500 frames)
Large 5 6 inch TFT color LCD display£¬High resolution(640*480£©, dual-window design --More clear, more detailed
One-touch automatic setup optimizes the position, range, timebase, and triggering to assure a stable display of virtually any waveform
Easy-to-use pop-up menu with built-in multi-language help system
23 automatic measurements
Waveform math: add, subtract, multiply, and divide
Store and recall over
Automatic cursor tracking measurements
XY Mode
Built-in FFT function converts a time-domain signal into its frequency components to measure harmonic content and distortion in systems
Waveform recorder to capture/replay input waveforms from CH1 and CH2 with a maximum record length of 1000 frames
Pass-Fail function compares a stored waveform to an unknown input
Average mode for smoothing waveforms
Square wave output (2V, 1kHz) for probe adjustment
USB host/device 2 0 full-speed interface ,support removeable disk, LAN Optional ,easy to control by PC or long-distance
Dimensions (mm):240(L)x165(W)x50(H), be carried easily
LabviewVBVC second design instance

Package Includes:

1 x Original Package

1 x New Hantek DSO1062B Digital Handheld Oscilloscope/Multimeter 200MHz 1Gsa/S

Specifications:

Model	DSO1202B	DSO1102B	DSO1062B
Oscilloscope mode
Bandwidth	200MHz	100MHz	60MHz
Real-time Sample Rate	1GSa/s
Equivalent Sample Rate	25GSa/s
Record Length(Sample Points)	Single-channel: Maximum 1M; Dual-channel:Maximum 512k
SEC/DIV Range	2nS/div-2000S/div (in a 2, 4, 8 sequence)
Delay Time Accuracy	500ps
Vertical
A/D Converter	8-bit resolution
VOLTS/DIV Range	2mV/div¡«5V/div at input BNC
Position Range	±50V(5V/div),±40V(2V/div¡«500mV/div),2V(200mV/div¡«50mV/div)±400mV(20mV/div¡«2mV/div)
Rise Time at BNC	≤1.7ns	≤3.5ns	≤5.8ns
DC Gain Accuracy	±4% for Sample or Average acquisition mode, 5mV/div to 2mV/div ±3% for Sample or Average acquisition mode, 5V/div to 10mV/div
Trigger
Trigger Sensitivity (Edge Trigger Type)	DC: CH1/CH2(Typical) 1div from DC to 10MHz;1.5div from 10MHz to Full EXT£¨Typical£© 200mV from DC to 40MHz EXT/5£¨Typical£© 1V from DC to 40MHz AC: Attenuates signals below 10Hz HF Reject: Attenuates signals above 80kHz LF Reject: Attenuates signals below 150kHz Noise Reject: Reduces trigger sensitivity
Trigger Level Range	CH1,CH2: ±8 divisions from center of screen EXT: ±1.2V EXT/5: ±6V
Trigger Level Accuracy, typical (Accuracy is for signals having rise and fall times ≥20ns)	CH1,CH2: ±(0.3div×V/div) (within ±4 divisions from center of screen)
Holdoff Range	100ns-10s
Trigger Type
Edge	Trigger on the rising or falling edge
Pulse Width	Trigger (when >,<,=,≠) on positive or negative pulses Pulse Width Range: 20ns-10s
Video	Trigger on an NTSC, PAL, or SECAM standard video signal Line Range: 1-525 (NTSC), 1-625 (PAL/SECAM)
Slope	Trigger (when >,<,=,≠) on a positive or negative slope Set Time: 20ns–10s
Overtime	from the rising or falling edge Set Time: 20-10s
Alternate	Internal trigger on edge, pulse width, video or slope
Measurement
Cursors	Manual: The difference between voltage cursors ¡÷V; the difference between time cursors ¡÷T; 1/¡÷T calculated by Hz. Tracing: The voltage and time at a waveform point
Automatic	Pk-Pk, Max, Min, Mean, Cyc RMS, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width
Meter Mode
Max.Resolution	6,000 Counts
DMM Testing Modes	Voltage, Current, Resistance, Capacitance,Diode & Continuity
Max. Input Voltage	AC: 600V, DC: 800V
Max. Input Current	AC: 10A, DC: 10A
Input Impedance	10 MΩ
Display
Type	Right angle 5.6 16-digit color LCD
Resolution	640*480 dots
Contrast	16 gears, with the progress bar to show adjustment
Interface	USB host and USB slave, Lan Optional
Power Supply
Voltage	DC Input:12--17VDC, 1500mA
Mechanical
Size	245 x 163 x 52 (mm)