Name: OWON HDS1022M 3.8inch 20MHz Dual channels Handheld Digital Oscilloscope & Multimeter Scopemeter With Multimeter
Brand: OWON
Availability: InStock

Product Details

OWON HDS1022M 3.8inch 20MHz Dual channels Handheld Digital Oscilloscope & Multimeter Scopemeter With Multimeter

Main Features:
1. Autoscale
2. 20 Automatic Measurements
3. 3 in 1(DSO+Multimeter+Cymometer)
4. Bandwidth: 20MHz
5. Support USB for data transmission to PC
6. TFT true color display
7. Replaceable li-ion battery back up (6 hours)

Application:
Design and Debug Circuit function test
Education Technical training
Maintenance testing

SPECIFICATION

Oscilloscope Specification
Model Name		HDS1021M	HDS1022M	HDS2062M
Bandwidth		20MHz	20MHz	60MHz
Sample Rate ( Real time )		100MS/s	100MS/s	250MS/s
Horizontal Scale(S/div)		5ns/div~100s/div,step by 1~2.5~5		5ns/div~100s/div,step by 1~2~5
Rise time(at input, typical)		≤17.5ns		≤5.8ns
Display		3.5'' color TFT display (320×240 pixels)	3.8'' color TFT display (320×240 pixels)
Channels		Single	Dual
Input impedance		1MΩ±2% in parallel with 20pF±3pF
Record length		Max. 6000 points on each channel
Interpolation		(sin x)/x
Probe attenuation factor		1X,10X,100X,1000X
Input coupling		DC, AC, GND	DC, AC
DC accuracy(Average)		Average>16:±(3% reading +0.05div) for ΔV	Average>16:±(5% reading+0.05div) for ΔV
Vertical Sensitivity		5mV/div~5V/div (at input)
Vertical resolution (A/D)		8 bit
Max. Input Voltage		400V (PK-PK) (DC + AC PK-PK, 1MΩ input impedance, Probe attenuation 10:1)
Trigger Type		Edge, Video
Trigger Mode		Auto, Normal, Single
Trigger level		±6 divisions from screen center
Acquisition modes		Sample, Peak Detect and Average
DC gain accuracy		±3%	±5%
Automatic Measurement		Vpp,Vavg,RMS,Frequency,Period,Vmax,Vmin,Vtop,Vbase,Width,Overshoot, Preshoot,Risetime,Falltime,+Width,-Width,+Duty,-Duty, Delay A→B↑, Delay A→B↓
Waveform math		Unavailable	+, -, ×, ÷
Waveform storage		4 waveforms
Lissajou’s figure	Bandwidth	Unavailable	20MHz	60MHz
	Phase difference	Unavailable	±3 degrees
Communication interface		USB
Power supply		100V-240V AC, 50/60Hz
Li-ion battery		7.4V, 6 hours operation


Multimeter specifications
Full scale reading	3 3/4 digits (Max.4000-count)	Diode	0V-1.5V
Input Impedance	10 MΩ	On/Off measurement	<50(±30) beeping
Capacitance	51.2nF-100uF:±(3%±3 digit)
Voltage	VDC:400mV,4V, 400V: ±(1±1digit) Max.input:DC 1000V, VAC:4V,40V, 400V:±(1±3digit) Frequency:40Hz-400Hz, Max:input:AC 750V(virtual value)
Current	DCA:40mA, 400mA:±(1.5%±1 digit) 20A:±(3%±3digit) DAA:40mA±(1.5%±3digit) 400mA:±(2±1digit) 20A:±(3%±3digit)
Impedance	400Ω:±(1%±3digit), 40Ω


General specifications
Interface	USB Data Cable (Transfer waveform data to a PC)
Power	Supply:100V~240V AC,50/60Hz DC input: 8.5VDC, 1500mA. Battery: 6 hours
Dimension	180mm x 115mm x 40mm
Weight	455g	645g

(Kelly Liu)

Our company

my services