Name: Hantek Handheld Isolated oscilloscope DSO1062S 60MHz
Brand: Hantek
Availability: InStock

Product Details

Hantek Handheld Isolated oscilloscope DSO1062S 60MHz

Features:

Isolated level:1000V CATII,600V CATIII.

High Bandwidth 60MHz Oscilloscope,1GSa/s sample rate, and 6000 Counts DMM with analog bargraph , and data recorder.

2M Memory Depth.

High Refresh Rate (2500 frames)

Large 5.6 inch TFT Color LCD Display,High Resolution(640x480), Dual-Window Design --More clear, More Detailed

One-touch automatic setup optimizes the position, range, timebase, and triggering to assure a stable display of virtually any waveform

Easy-to-use pop-up menu with built-in multi-language help system

23 Automatic Measurements

Waveform Math: Add, Subtract, Multiply, and Divide

Store and recall over

Automatic cursor tracking measurements.

XY Mode

Built-in FFT function converts a time-domain signal into its frequency components to measure harmonic content and distortion in systems.

Waveform Recorder to capture/replay input waveforms from CH1 and CH2 with a maximum record length of 1000 frames.

Pass-Fail function compares a stored waveform to an unknown input

Average Mode for smoothing waveforms.

Square Wave Output (2V, 1kHz) for probe adjustment

USB Host/Device 2.0 full-speed interface ,support removeable disk, LAN Optional ,Easy to control by PC or long-distance.

Dimensions (mm):240(L)x165(W)x50(H), be carried easily.

Operating System: Windows NT, Windows 2000, Windows XP, VISTA, Windows 7.

Accessories: probles x2; test leads x2; USB cord x1; Power cord x1; CD x1; Bag x1.

Specification:

Model		DSO1202S	DSO1122S	DSO1062S
Oscilloscope Mode
Vertical	Bandwidth	200MHz	120MHz	60MHz
	Real-time Sample Rate	1GSa/s
	Equivalent Sample Rate	25GSa/s
	Record Length (Sample Points)	Single-channel: Maximum 2M; Dual-channel: Maximum 1M
	SEC/DIV Range	2nS/div-2000S/div (in a 2, 4, 8 sequence)
	A/D Converter	8-bit resolution
	VOLTS/DIV Range	2mV/div~5V/div at input BNC
	Position Range	+-50V(5V/div), +-40V(2V/div~500mV/div), +-2V(200mV/div~50mV/div)+-400mV(20mV/div~2mV/div)
	Rise Time at BNC	≤1.7ns	≤2.9ns	≤5.8ns
	DC Gain Accuracy	+-4% for Sample or Average acquisition mode, 5mV/div to 2mV/div +-3% for Sample or Average acquisition mode, 5V/div to 10mV/div
Trigger	Trigger Sensitivity (Edge Trigger Type)	DC: CH1/CH2(Typical) 1div from DC to 10MHz;1.5div from 10MHz to Full AC: Attenuates signals below 10Hz HF Reject: Attenuates signals above 80kHz LF Reject: Attenuates signals below 150kHz Noise Reject: Reduces trigger sensitivity
	Trigger LevelRange	CH1,CH2:+-8 divisions from center of screen
	Hold off Range	100ns-10s
	Trigger Level Accuracy,typical (Accuracy is for signals having rise and fall times >=20ns)	CH1,CH2:+-(0.3div×V/div) (within +-4 divisions from center of screen)
Trigger Type	Edge	Trigger on the rising or falling edge
	Video	Trigger on an NTSC, PAL, or SECAM standard video signal Line Range: 1-525 (NTSC), 1-625 (PAL/SECAM)
	Slope	Trigger (when >,<,=,not equal) on a positive or negative slope Set Time: 20ns-10s
	Overtime	From the rising or falling edge Set Time: 20ns-10s
	Alternate	Internal trigger on edge, pulse width, video or slope
Measurement	Cursors	Manual: The difference between voltage cursors deltaV; the difference between time cursors deltaT; 1/deltaT calculated by Hz. Tracing: The voltage and time at a waveform point
	Automatic	Pk-Pk, Max, Min, Mean, Cyc RMS, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width
		Meter mode
	Max. Resolution	6,000 Counts
	DMM Testing Modes	Voltage, Current, Resistance, Capacitance, Diode & Continuity
	Max. Input Current	AC: 10A, DC: 10A
	Input Impedance	10 MΩ
Isolation	The float voltage between BNC and Ground	600V CATIII, 1000V CAT II
	The float voltage between each Channel	600V CATIII, 1000V CAT II
	The float voltage between Multimeter and Ground	1000V
	between input Ports directly	400V CAT II
	Input by 10:1 probe	600V CATIII, 1000V CAT II
	The Max input voltage of Multimeter	The float voltage between Multimeter and Ground
Display	Type	Right angle 5.6'' 16-digit color LCD
	Resolution	640x480 dots
	Contrast	16 gears, with the progress bar to show adjustment
	Interface	USB host and USB slave, LAN Optional
Power	Voltage	DC Input:12--17VDC, 2000mA
Measurement	Size	245 x 163 x 52 (mm)
	Weight	3.5kg