pure sine power 10000w wave power circui inverter
USD $193 - $194 /Box
Min.Order:1 Box
pure sine power 10000w wave power circui inverter
[Performance]
[ Specification ]
Control Characteristics
TG700 permanent magnet servo controller | |
Control mode | High carrier sine wave PWM vector control |
Speed control accuracy | ±0.01% |
Speed control range | 1:1000 |
Maximum torque | 455% of the rated motor torque |
Speed setting signal | '-10~10V,0~10V,4~20mA |
Deceleration time | Acceleration, deceleration individual settings, set the unit 0.01 seconds |
S word set | Starting, acceleration, deceleration start, stop of each individual set point |
The main control functions | Starting torque compensation (load detection value input method) Control power control (battery operation) Multi-speed operation (up to 9 speed) Automatic S word deceleration run |
Protective function | |
Motor protection | Electronic thermal protection devices |
Instantaneous overcurrent | More than 300% of the rated output current of about |
Fuse protection | Fuse stop |
Overload capacity | 150% of one minute, 10 seconds 200% |
Overvoltage | Stop when the main circuit DC voltage 400V / 820V or more |
Insufficient voltage | Stop when the main circuit DC voltage 220V / 380V or more |
Instantaneous power compensation | 15ms or more stops (50% load) when |
Fin overheat | Thermistor protection |
Antistall | Acceleration and deceleration, stall prevention operation |
Ground protection | Electronic circuit protection |
Charging display | The main circuit DC voltage drops to 50V before lighting display |
Environmental conditions | |
Venues | Indoors (no corrosive gas, dust, place) |
Humidity | Below 90% RH (non-condensing) |
Storage temperature | -20 ~ 70℃ |
Ambient temperature | -10 ~ 50℃ |
Altitude | 1000m below |
Vibration resistance acceleration | Vibration frequency less than 20Hz when 9.81m / S (1G) 20-50Hz when 1.96m / S (0.2G) until |
[SIZE]